User manual WHIRLPOOL ZB 265 INSTRUCTION FOR USE

[. . . ] Changing programme selection: If the programme selected is changed during drying, the dryer stops. To operate the new programme, again press the “Start (Pause)” button. Interrupting programme: To interrupt the dryer during the drying cycle, set the programme selector knob to “Airing” “ ” and press the “Start (Pause)” button. Wait at least 5 minutes before opening the door to allow the dryer to cool down. [. . . ] 0 Cotton or linen hot wash / coloured laundry X X X X X X 100’ 90’ 180’ 160’ 85’ 70’ 160’ 120’ 70’ 60’ 120’ 100’ 50’ 90’ 40’ 80’ 30’ 70’ 40’ 70’ 30’ 60’ 20’ 50’ Cotton Similar types of laundry which do not require ironing such as: dry towels, bed Cupboard dry * linen, underwear, baby clothes, T-shirts, cotton socks. Iron dry * Laundry which requires ironing such as: bed and table linen, dry towels, T-shirts, polo shirts, work clothes. 5 X X X X X X X X X X X X X X X X X X X X X X X X Mixed fabrics Laundry with thick, multi-layered areas Cupboard dry + such as: bed and table linen, track suits, anoraks, blankets. Synthetic, mixed fibre or cotton easy care (ironing not required) laundry Laundry which does not require ironing Cupboard dry * such as: shirts, blouses, T-shirts, sportswear. 5 kg Iron dry Delicate plus Cupboard dry Low drying intensity for delicates and items labelled with , such as: trousers, shirts. 5 kg X X X X X - 100’ 85’ Airing Laundry is aired and refreshed for 30 minutes without heating. Clean the filter at the end of every cycle. Brush lint using a soft brush or your fingertips. You want to correctly care for and clean your dryer: Empty the water container at the end of each drying cycle. Clean the heat exchanger at least every month. (For further information see chapter “Heat Exchanger” in the Instructions for Use). Replacing the drum light bulb (if supplied). all programme sequence indicators blinking. AFTER-SALES SERVICE If the fault is still present once the above checks have been undertaken or should the fault occur for a second time, switch the machine off. Please contact your After-Sales Service representative (for more information, refer to the warranty manual). Please have the following details ready when calling your after-sales service representative: • The nature of the fault. • The dryer type and model. €¢ The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open. 3 Before using the machine, please also read the instructions for use carefully! tRKE 9097 Quick Reference Guide GB Programme sequence Programme selector knob The drying programme is selected by turning this knob. €œStart (Pause)” button The drying programme is started by pressing this button. The indicator lamp flashes during the selection phase and lights up during drying. [. . . ] By pressing the dryness adjustment buttons “+” or “-” the pre-setting can be changed. options Gentle Reduces drying intensity (recommended for delicate items). Drum light (Option only available when programme is selected). Push the button to turn the drum light on for 30 sec. [. . . ]