User manual WHISTLER 1790SE

[. . . ] OWNER'S MANUAL 1790SE LASER/RADAR DETECTOR THE WHISTLER GROUP CORPORATE HEADQUARTERS 13016 N. Bentonville, AR 72712 TEL (501) 273-6012 FX (501) 273-2927 www. whistlergroup. com PRODUCT DEVELOPMENT CENTER 25 Industrial Ave. Chelmsford, MA 01824 TEL (978) 244-1400 FX (978) 244-1492 CUSTOMER RETURN CENTER 1201 N. Rogers, AR 72756 Consumer Relations Tel (800) 531-0004 Email: info@whistlergroup. com P/N 1790SE, © WHISTLER 2001 INTRODUCTION If you have questions concerning the operation of this Whistler product please call consumer relations: Dear Whistler Owner, Technology has changed dramatically in 30 years and Whistler has weathered the changes in style. [. . . ] To record or play a message (Memo mode): · Press memo button and release. The unit will beep once; this enters Memo mode. Display reads: *Display COMBO TONE 3 TEST YES VG2 OFF SAFETY ON VOICE ON B SVR ON X Yes K Yes Ka Yes Laser Yes To Change, Reads: or = YES = NO = ON = OFF = ON = OFF = ON = OFF = ON = OFF = ON = OFF = ON = OFF = ON = OFF = ON = OFF = ON = OFF Option: Press Combo=Radar & Compass Radar=No Compass Compass=No Radar Tone 1, 2, or 3 (3 different X, K, Ka patterns) X, K, Ka Audio tones 1 beep during Power Up Turns VG-2 On Turns VG-2 Off Turns Safety Radar On Turns Safety Radar Off Real Voice engaged Real Voice disengaged Battery Saver On Battery Saver Off X Band On X Band Off K Band On K Band Off Ka Band On Ka Band Off Laser On Laser Off *Factory settings. Press anytime to exit. 16 17 OPERATION · Press and release the (Quiet/Record) button to begin a recording. Note: Recording starts as soon as the button is released. Display reads: OPERATION To exit Memo mode: · Press memo button and release. NOTE: Memo mode automatically exits within 20 seconds if a button is not pressed. Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector within 3 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the 3 hours have expired. The detector will alert you with an audible and visual warning before it shuts off. Display reads: REC = record, 1 = track #, 8 = time remaining If the recording time expires for a track, the unit will automatically switch to the next track. Press and release (Quiet/Record) again to stop recording. The unit will automatically stop recording once track 9 is completed. To play a message: · Enter Memo mode and press (Power/Play) to listen to recorded messages. · To play a selected track, press (Volume Up) or (Volume Down) button until selected track appears on the display. Display reads: PLY = play, 1 = track #, 8 = time remaining During this warning you can momentarily reset the unit by pressing any button. If the unit has automatically turned itself off, press the (Power/Play) button to turn the unit back on. You can manually engage the Vehicle Battery Saver Mode by pressing and holding the City button until one beep is heard. Refer to "Option Select Mode" for instructions for deactivating battery saver mode feature. Vehicle Battery Monitor The vehicle's battery voltage can be momentarily displayed by pressing and holding the Mode button for 3 seconds. Display reads: · Press the (Power/Play) button. Messages are kept in memory and are not affected by resetting the factory features. [. . . ] Box please. ) · A detailed description of the problem (e. g. , "Unit per forms self-test but does not respond to radar"). · A copy of your dated proof of purchase or bill of sale. Be certain your unit is returned with its serial number. For reference, please write your unit's serial number in the following space: s/n __________________. [. . . ]