User manual WHITE BROWN DB 731

[. . . ] ⷠPush 2 or 3 times the steam delivery button before ironing. This will ensure a regular steam production when you start ironing. This function is obtained by pressing the continuous steam delivery button and moving the slide backwards so as to lock the button. ⷠTo interrupt steam output, simply move the slide back to the original position. [. . . ] ⷠIf the appliance is not used for a long time it is suggested, before ironing, to press the steam supply button for 30 seconds putting the iron on a cloth ; this to clean the internal tubes of the appliance. After ironing water left in the boiler need not to be emptied. ⷠDivide garments according to the required ironing temperature, starting with those which require the coolest temperature. ⷠSilk can be dry ironed on the wrong side. ⷠWool, cotton and fine linen fabrics can be steam ironed on the wrong side or alternatively on the right side with a thin layer of material between the fabric to be ironed and the iron to avoid "shine". starched fabrics require a higher humidity. Iron white and light fabrics on the right side and dark colours on the wrong side. Iron embroidery on the wrong side to make it stand out. ⷠLinen can be steam ironed, steaming abundantly and ironing dark fabrics only on the wrong side to avoid "shine". Each time you use the iron (and when you use it for the first time) or if you have not used steam for several minutes, push the steam button repeatedly. This eliminates cold water from the steam circuit. Before steam ironing, make sure the fabric is suitable for this type of ironing. Packaging (plastic bags, polystyrene, etc) must never be left within reach of children as it represents a hazard. If the cap or the hydraulic and electrical safety system are damaged, contact a qualified electrician. ⷠNever leave water in the appliance where rooms temperatures are less than or equal to 0°C. ⷠIf you decide to stop using the appliance, after unplugging from the mains, render it unusable by cutting the power cable. ⷠThe power cable must never be in contact with the soleplate of the iron. ⷠNever use the appliance in bath and shower rooms. ⷠNever put the appliance under the tap to fill with water. ⷠAiming the jet steam at people is dangerous and should be avoided. Keep the appliance completely cooled before storing it. ⷠThe boiler must never be moved during operation. [. . . ] Make sure the cord never comes into contact with the hot parts of the appliance. Do not wind the cord around the appliance and do not bend it. ⷠIt is not recommended to use adapters, multiple sockets or extension cord. If necessary use an extension cord or a multiple adapter corresponding to current safety legislation making sure the power limit indicated on the adapter is not exceeded. [. . . ]