User manual WHITES ELECTRONICS SPECTRUM XLT

[. . . ] XLT® Table of Contents Contents Page Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 XLT® Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Basic Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the BACKLIGHT is off, it will fade when the MAIN MENU display appears. If the BACKLIGHT is ON, it will continue until turned off manually or a different program is selected. BACKLIGHT can be saved as part of a custom program, for example a NIGHT HUNT program. When Backlight is ON and the TRIGGER is squeezed and released to begin searching, "BACKLIGHT ON" will appear continually on the display to warn you of the extra battery duty. EMERGENCY BACKLIGHT - If in the dark you cannot see the display to turn the BACKLIGHT on, holding the TRIGGER and pressing MENU will bring up the BACKLIGHT adjustment screen. Release the TRIGGER and press ARROW up to select a level you can see the display. Squeeze and release the TRIGGER to continue. 23 Chapter 4 XLT® Basic Adjustments 10. Viewing Angle VIEWING ANGLE Adjusts the display for visibility in low or high temperature conditions. Select VIEWING ANGLE with the ARROW controls and press ENTER, use the ARROW controls to make changes. The current level is shown on the right side of the display. The graphic control knob indicates the relationship of the current setting to minimum and maximum levels. Squeeze and release the TRIGGER to resume searching. VIEWING ANGLE has no impact on battery life. EMERGENCY VIEWING ANGLE PROCEDURE- If your detector has been in the cold or heat prior to use, you may not be able to see the display to adjust VIEWING ANGLE. Press the ON/OFF control, hold the TRIGGER and press ARROW up. You can then use the ARROW controls to find a VIEWING ANGLE level that allows you to read the display. Squeeze and release the TRIGGER to begin searching. Like the BACKLIGHT, you will lose your custom VIEWING ANGLE setting if you change Programs. You may need to use the EMERGENCY VIEWING ANGLE PROCEDURE to see the display. Select the program you desire, use the ENTER control to enter, Air/Ground Balance, then again use the EMERGENCY VIEWING ANGLE PROCEDURE if the display is unreadable. VIEWING ANGLE is preset at average levels in the factory preset programs. The display may be unreadable at either of the extreme settings in a particular environment. [. . . ] The unit must be accompanied by a detailed explanation of the symptoms of the failure. You must provide proof of date-of-purchase before the unit is serviced. This is a transferable manufacturer warranty, which covers the instrument two years from the original purchase date, regardless of the owner. Items excluded from the warranty are non-rechargeable batteries, accessories that are not standard equipment, shipping / handling costs outside the continental USA, Special Delivery costs (Air Freight, Next Day, 2nd Day, Packaging Services, etc. ) and all shipping / handling costs inside the continental USA 90 days after purchase. [. . . ]