User manual WIKO F200

[. . . ] The contents of this manual may differ in certain respects from the description of your phone depending on its software version and your telephone operator. You have just purchased your WIKO F200 (WB2860) phone. This guide contains all the information needed to use the phone so that you can quickly familiarise yourself, we hope, with the world of WIKO. A complete version of the guidelines, safety instructions and your device user guide is available on our website www. [. . . ] Contact with liquid: Do not expose the device to liquid or touch it with wet hands: any damage caused by water may be irreparable. Use only WIKO-approved in box accessories. The use of unauthorised accessories may damage your phone or cause a safety risk. Do not attempt to disassemble the battery yourself. Do not destroy the batteries and chargers. Keep batteries away from electronic objects. You should not expose the batteries to very low or very high temperatures (below 0°C or above 45°C). It is recommended to recharge the battery at a room temperature between 5°C and 25°C. To optimise battery life, only use the WIKO battery and charger supplied in the box. Incorrect use of the battery or replacement with an incorrect type of battery may cause fire, explosion or other risks. Dispose of used batteries according to the instructions. Shocks and impact: Handle and use your phone with the utmost care. Protect your phone: shocks and impact may damage it. Some parts of your phone are made from glass and might break if the phone is dropped or is subject to severe impact. Do not touch the screen with sharp objects. Electric shock: Do not try to dismantle your device as there is a very real risk of electric shock. Maintenance: If you want to clean your handset, use a dry cloth (do not use a solvent, such as benzene, or alcohol). Recharge your phone in a well ventilated area. Do not recharge your device when it is resting on a soft surface. Damage to magnetic strips: Keep your phone away from credit cards as they may damage the data on the magnetic strips. Do not use the mobile phone in an environment at too high or too low temperature, never expose your mobile phone to direct sunlight or too wet an environment. The suitable temperature for the phone is -10°c to +45°c, the maximum charging temperature declared by the manufacturer is +40°c. [. . . ] Only qualified service personnel should repair your device. If you give your device to non-qualified personnel for repair, the phone will not be covered by WIKO's warranty. The IMEI code is the serial number used to identify your device and for After-Sales support. There are several ways of finding your IMEI code: · Type * # 06 # on your mobile telephone's keypad. [. . . ]