User manual WOXTER BIG BASS 130

[. . . ] In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Step 1 Checking the contents of the box Digital camera Strap Two AA batteries USB cable Other accessories not shown: warranty card Contents may vary depending on purchase location. WOXTER Setup CD-ROM Step 2 4 Preparing the Camera Step 3 5 Shooting and Playing Back Images "Preparing the Camera" (p. 12) "Shooting, Viewing, and Erasing" (p. 18) Step How to Use the Camera Step Printing "Camera Settings" (p. [. . . ] *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Making new DPOF reservations with this camera will erase the reservations made by the other device. SET OK DO NOT REMOVE USB CABLE PRINT CANCEL MENU CONTINUE CANCEL 11 Press the m button. 12 When the message [REMOVE USB CABLE] is DPOF print reservations can be made for up to 999 images per card. displayed, disconnect the USB cable from the camera and printer. EN 47 Single-frame print reservations [<] 1 2 4 Display the setup menu. "Using the Menu" (p. 4) Use HI to select the image for print reservation. Press the H button. X From the playback menu q, select [PRINT ORDER] and then press the H button. PRINT ORDER BACK MENU NO DATE TIME SET OK < U 5 SET OK Use FG to select the [X] (date print) screen option, and press the H button. Submenu 2 Application This prints the image only. This prints the image with the shooting date. This prints the image with the shooting time. PRINT ORDER 1 ( 1) EXIT MENU 3 Use FG to select [<], and press the H button. 4/30 0 NO DATE TIME NORM 10M FILE 100 0004 '10/10/26 12:30 SET OK SET CANCEL BACK MENU SET OK 6 Use FG to select [SET], and press the H button. 48 EN Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 2 3 1 2 Follow Steps 1 and 2 in [<] (p. Use FG to select [U], and press the H button. "Vertical lines appear on the screen". This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. "The light is caught in the picture". Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". 51) Date and time function "Date and time settings return to the default setting". If the batteries are removed and left out of the camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. "Date, time, time zone, and language" (p. 17) Shutter button "No picture is taken when the shutter button is pressed". To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. [. . . ] Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than Olympus or an Olympus authorized service station. Any defect or damage that occurs due to transport, a falI, shock, etc. Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. [. . . ]