User manual X10 CM11E DATASHEET

[. . . ] Computer Interface Control X10 Home Automation with any Multimedia PC Benefits The X10 PC interface is the ideal way of using your PC to enhance your home security, save energy and add convenience to the way you run your home. WORKS WITH THE PC SWITCHED OFF Once the interface has been programmed, the PC is no longer needed. [. . . ] A cable with an RJ11 connection on one end and a 9-pin "D" type connector on the other is provided to connect the Interface to the serial port of the PC. TWO-WAY Product number: CM11E Technical data · Stand alone operation. · Easy to use Windows 98, 2000 and XP compatible software. · Controls timed events and macros. · Scheduled events resume automatically after a power outage (EEPROM). · For a full range of home automation products. The Computer Interface is fully two-way, both generating and receiving X10 powerline commands. ACTIVEHOME SOFTWARE User friendly Windows 98, 2000 and software is provided with the Interface graphical representations of switches, to provide point-and-click control of easy setting of scheduled events and SCHEDULED EVENTS XP compatible which includes modules, etc. , modules, and macros. Controls indicators CONNECTIONS Events may be scheduled to occur at a particular time every day, on chosen days only, between chosen dates, etc. You can also program the interface to turn lights on at dawn and off at dusk just by choosing your location from a worldwide list. MACROS · AC outlet on front of module for computer power cord. [. . . ] For example, pressing 'A1 ON' on a controller might turn on stair lights and bedroom lights, then after 20 minutes dim the bedroom lights to 50% and turn off the stair lights, and finally turn all lights off 30 minutes later. [. . . ]