User manual X10 IR32A

[. . . ] IconRemote TM Owner's Manual Model IR32A SAFETY CONSIDERATIONS Remember to exercise good common sense when using the Home Automation features of your remote - especially when scheduling unattended devices. There can be some unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turned on. If that should happen, your coffee pot could be damaged from overheating. [. . . ] · Select Home/Setup/X10/More/ QuickPower Macro. · Select Pick Module, and select the command (s) you want to send. Try a simple "Off" command for now, but understand that you can string many commands from different modules and different rooms together in conjunction with delays as well. · Press the Side Key next to the X10 icon to trigger the Quick Power Macro. 23 X10 Macros 22 Sleep Sleep lets you set any device to turn off a preset time from now. You can set the off time in increments of 15 minutes, up to a maximum of 90 minutes. Press the HOME button to go to the Home Screen, then press the Side Key next to Sleep. Learning Tips On Learning The following are the guidelines that will help you use this feature: a. Some functions from some types of remotes might not be able to be learned. No functions may be learned under the HOME, MODE, FAVORITE, HIS, or HERS (hard) keys. Use fresh batteries for both the IR32A remote and your Original Remote. Keep at least three feet away from incandescent or lowenergy lights when learning. (Ambient light can influence learning a great deal. ) e. Place the original remote end-to-end with the IR32A remote so the IR transmitter (at the top) on your original remote points at the IR learning device on the bottom of the IR32A IconRemote. Keep the distance between the two remotes to approximately 1 inch. Line up the remotes and then press the key you want to learn. To get the correct range, press the key on the remote you are learning and you will see a "red halo" around the transmit icon at the bottom left of the screen starts to flicker. The best range for learning is when it flickers most rapidly. Move the position of the 2 remotes to achieve this. (Slightly off center may improve the best learning. ) Do not change this "best distance" between the two remotes until you have learned all the required keys. When Learning, you should normally not release the key being learned until the display prompts you to do so. However, some keys might be learned multiple times if you do this. If this happens just "tap" the key you want to learn, rather than press and hold it. [. . . ] · Press Back to leave the Enter Code screen. 51 Troubleshooting The Favorites you set up don't operate your device. · Make sure you selected the correct device (TV, Cable, Sat, etc. , when you set up each favorite. See Add/Edit Favorites on page 38 to change the device type for your favorite(s). [. . . ]