Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual X10 MS10A. We hope that this X10 MS10A user guide will be useful to you.
Lastmanuals help download the user guide X10 MS10A.
Detailed instructions for use are in the User's Guide.
[. . . ] Motion Sensor, Model MS10A Set Up and Operating Instructions
Installation 1. Slide the battery compartment cover off and install four AA alkaline batteries. Set the slide switch on the back of the MS10A to 1 to trip the alarm if only one movement is detected (most sensitive). [. . . ] After replacing the batteries, the following steps are necessary to determine that the Console still recognizes the Motion Sensor. Place the Console's slide switch to RUN1 or RUN2. If the appropriate zone indicator blinks, then the Console recognized the Motion Sensor and no further action is necessary.
SENSITIVITY
HIGH
LOW
If the zone indicator didn't blink in step 2 above:
TEST CODE
7. Set the Console's slide switch back to RUN1 or RUN2. To set up additional Motion Sensors (up to 16*) repeat the above steps. *Note: you can install a total of 16 zones in the Console. This can be a combination of Door/Window Sensors and Motion Sensors. 8 Door/Window Sensors AND 8 Motion Sensors. See your Security System Owner's Manual for more information. Operation When the Security System is armed using a Key Chain Remote (KR10A) the Motion Sensor will always trip the alarm when it sees motion. When the system is armed using an SH624 Remote Control it can be armed in the Home or Away mode. When armed in the Home mode, Motion Sensors will NOT trip the alarm. Place the Motion Sensor on a bookshelf, or attach it to a wall about 6 feet off the ground, using the supplied mounting bracket. Wait about 45 seconds for the Motion Sensor to settle then walk past it.
1. [. . . ] LIMITED1-YEARWARRANTY Please visit www. x10. com/warranty to complete your on-line warranty registration. For help or more information on setup, please visit: www. x10. com/support
MS10A-8/02
X10. com, a Div. For additional help, visit www. x10. com/support [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE X10 MS10A
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual X10 MS10A will begin.
