User manual X10 SC503

[. . . ] You can turn off your child's radio or night light from your bedroom. You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with the push of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button to save energy. How many times have you gone to bed and left a downstairs light on because you didn't want to get out of bed to turn it off? [. . . ] It can also be used for a lamp - but cannot dim it. The Wall Switch Module turns on and off, and dims and brightens an incandescent light up to 500 watts, which is normally operated by a wall switch. On, Off, Bright, Dim, All Lights On, and All Units Off buttons To turn ON a light or appliance Press and release the number button corresponding to the Unit Code set on the Module to be controlled. all lamps connected to Lamp Modules or Wall Switch Modules set to the same House Code) press the All Lights On button. This key does not affect Appliance Modules. To turn OFF a light or appliance Press and release the number button corresponding to the Unit Code set on the Module to be controlled. To turn off ALL modules, including Appliance Modules, press the All Units Off button. To Dim or Brighten lights Press and release the number button for the Lamp Module or Wall Switch Module you want to Dim or Brighten (you can't Dim or Brighten Appliance Modules). Then press the Dim button to dim or the Bright button to brighten the light. Hold the button pressed until the desired brightness level is reached. You can control Modules in groups by pressing 1, 2, 3, etc. Modules that are set to 1, 2, and 3, etc. , will then turn on and off or brighten and dim at the same time (as a group). The Finder Label is a convenient place to indicate the locations of lights and appliances controller by your system. There is one box for each unit key. Setting up the Maxi Controller 1. To install your Maxi Controller, simply plug the power cord into any functioning wall outlet. Using a small screwdriver, choose one the 16 letters on the Maxi Controller's Housecode dial. All X10 Modules have a similar red Housecode dial. Set the Maxi Controller and all the Modules to be controlled by it to the same Housecode letter. Plug a lamp or appliance into an X10 Lamp or Appliance Module. 2 3 Using the Maxi Controller Problem Solving If a particular module won't go on or off from the buttons on the Maxi Controller: Check that you have power to the outlet controlling the Module and the switch on the light or appliance is ON. Check that the Unit Code on the Module is set to the correct number. Check that the Housecode on the Module is set correctly. The Housecode on the Module and the Maxi Controller must be set to the same letter. Try plugging the Module and the Maxi Controller into the same outlet. [. . . ] The power On-Off switch on the Wall Switch Module is used to completely turn off the power. For example, when changing a light bulb. X10 Wireless Technology, Inc. Limited One Year Warranty X10. com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. [. . . ]