User manual X10 TR16A

[. . . ] Touch Tone Controller Model TR16A Owner's Manual CONTENTS IMPORTANT NOTICE Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How it Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Lamp Module turns on and off any lamp up to 300 watts. It can also be dimmed and brightened from other types of X10 Controller. The Appliance Module turns on and off appliances such as a window fan, air conditioner, or stereo, etc. It can also be used for a lamp but can't dim or brighten it. The Wall Switch Module turns on and off any incandescent light up to 500 watts. It can also be dimmed and brightened from other X10 controllers. 1. Plug the power cord into any functioning 120V AC outlet and plug the phone cord into an RJ11 phone jack. (Connect to the unit first, then to the wall jack). Using a small screwdriver, set the Touch Tone Controller's Housecode dial to the same letter as your X10 Modules (A through P). Set a Personal Identification Number (PIN) (0-999). Use one, two, or three digits as desired. Set all dials to the OFF position for no security (PIN) code (not recommended). Set the Ans Delay switch to Min (for 15 seconds delay), or Max (for 35 seconds delay) before the unit answers a call. Install and set up X10 Modules (sold separately). Refer to the instructions included with the Modules. Set all your Modules to the same Housecode as you set on the Touch Tone Controller. Set each Module to a Unit Code between 1 and 8. Any Module(s) set to the same number as the third digit on the security code dial (on right) flashes on and off when the phone rings. LOCAL To Turn a light or appliance ON or OFF from the keyboard. Press and release the number button (1 8) corresponding to the Unit Code you set on the Module you want to control. Then press and release the ON or OFF button. To turn on ALL lights from the keyboard. Press and release the All Lights On button. [. . . ] If the Touch Tone Controller works in some outlets but not others, visit: www. x10. com/support for help. If the Touch Tone Controller answers the phone too soon and prevents your answering machine from picking up: Set the MIN MAX Delay Switch on the Touch Tone Controller to MAX (35 seconds). 6 INTERCOM SYSTEMS Intercom systems that send voice signals over existing house wiring can interfere with the operation of the Touch Tone Controller when the intercom is in use. If the intercom has its own separate wiring or uses wireless Radio Frequency (RF) transmissions it will not cause a problem. [. . . ]