User manual X10 UR47A

[. . . ] UR47A X10 DVD SU P E RR EMOTE WNER' MANUAL O WNER ' S M ANUAL READ THIS FIRST R EAD T HIS F IRST ! CONSIDERA ONSIDERATIONS S AFETY C ONSIDERATIONS Remember to exercise good common sense when using the Home Automation features of your SuperRemote - especially when controlling unattended devices. There can be some unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turned on. If that should happen, your coffee pot could be damaged from overheating. [. . . ] Plug the Lamp Module into a convenient AC outlet. SUPER X10 DVD S UPER R EMOTE The X10 DVD SuperRemote allows you to control practically everything electrical in your home. It has IR technology that lets you control all your TV, VCR, Cable Box, Satellite equipment, DVD Player; and X10 RF technology that lets you control lamps and appliances anywhere in your home. To find out more about configuring the SuperRemote to work with your audio/ video equipment, see the section titled "Setting Up your SuperRemote. " 1 . Push the tab and lift off the battery cover. 2 . Plug a lamp or appliance into the Transceiver Module. 3 . Plug the Transceiver Module into a convenient AC outlet. Fully extend the antenna. MODULE L AMP M ODULE The Lamp Module (sold separately) can be used to control any incandescent lamp rated up to 300W. It is not suitable for other types of lamp such as fluorescent or energy saving lamps, or lamps which include a dimmer control. Caution: Do not connect an appliance such as a coffee pot or heater to the Lamp Module. It may damage the module and the appliance and could cause a fire hazard. 8 2 . Fit four AAA batteries, taking care to match the + and - marks in the battery compartment. 9 SETTING UP S ETTING U P YOUR S UPERREMOTE DESCRIPTIONS B UTTON D ESCRIPTIONS Since this remote is primarily an X10 and DVD remote, the button description below refer to the operation when in DVD mode. In other modes, some buttons have other functions. The indicator light flashes when you press a button. Works in the same way as your original remote. If there are 2 or more titles on the DVD this button lets you to select another title. Toggles track/time/audio/subtitle/title information on and off the screen. Menu navigation. SET UP 0-9 Used for programming the remote. Used as your original remote and to enter device codes for X10 Modules. Lets you control X10 modules to operate lamps and appliances around the home. A-B INDICATOR INDICATOR LIGHT ENT CHANNEL, VOLUME, MUTE POWER X10 ON/OFF KEYS TV, SAT TV, VCR, CBL, AUX, SAT, DVD TITLE S ETTING UP FOR TV, VCR, TV, C ABLE , S ATELLITE /DSS, AND SA DVD 1 . Turn on the device you want to control (TV VCR, cable , box, satellite receiver, DVD, etc. ). Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button. SUBTITLE AY D I S P L AY RETURN UP/DOWN/LEFT/RIGHT DVD KEYS OK Menu Select/OK/Enter button. [. . . ] X10 Home Automation products also integrate with X10 security systems, so you can use the security remotes that come with them to control macros and flash lights when the security system is tripped. Check out our Web Site at: Switch entrance or garage lights on from your car with the convenient Keychain Remote KR21A. Replace your existing wall switches with the Wall Switch Module WS467. Other models available for 3-way and fluorescent lighting. 1 13 5 9 I M E A Control a ceiling light, closet light, etc. with the convenient Screw-in Lamp Module LM15A. for more information on these and many other X10 products. http://www. x10. com http://www. x10. com Replace existing AC wall outlets with the Receptacle Module SR227. [. . . ]