User manual X10 UR74A

[. . . ] UR74A UNIVERSAL REMOTE L EARNING R EMOTE O WNER ' S M ANUAL WNER' MANUAL READ THIS FIRST IRST!READ THIS FIRST! CONSIDERA ONSIDERATIONS SAFETY CONSIDERATIONS Remember to exercise good common sense when using the Home Automation features of your 5 in 1 Remote - especially when scheduling unattended devices. There can be some unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turned on. [. . . ] Plug a lamp or appliance into the Transceiver Module. 3 . Plug the Transceiver Module into a convenient AC outlet. Push the tab and lift off the battery cover. MODULE LAMP MODULE The Lamp Module (sold separately) may be used to control any incandescent lamp rated up to 300W. It is not suitable for other types of lamp such as fluorescent or energy saving lamps, or lamps which include a dimmer control. Caution: Do not connect an appliance such as a coffee pot or heater to the Lamp Module. It may damage the module and the appliance and could cause a fire hazard. 8 2 . Fit four AAA batteries, taking care to match the + and marks in the battery compartment. 9 SETTING UP SETTING UP REMOTE YOUR REMOTE DESCRIPTIONS BUTTON DESCRIPTIONS INDICATOR INDICATOR LIGHT OK Select Menu items of the device you are controlling. The indicator light flashes when the remote is operating. Lets you control X10 modules to operate lamps and appliances around the home. Selects the last channel viewed on your TV, VCR, or Cable Box. Also used to switch X10 modules on and off. Also used to brighten and dim lamps connected to X10 Modules. Used as your original remote and to enter device codes. Access the Menu function of the device you are controlling (if available). PLAY, REW, FF, STOP PAUSE , REC , PLAY REW, FF, STOP PAUSE, Work the same as on your original remote. You must press the REC button twice to begin recording. LEARN POWER TV, CABLE ABLE, SETTING UP FOR TV, VCR, CABLE, AND SATELLITE 1 . Turn on the device you want to control (TV VCR, cable box, , satellite receiver etc. ). TV, VCR, CBL, SAT TV, SAT X10 SET UP LAST 2 . Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button. CHANNEL +/- VOLUME +/- 3 . Press and release mode button for the device you want to control. The LED blinks once. MUTE 0-9 ENTER 4 . Enter the 3 digit Code from the Library Code Table (separate sheet). The LED turns off after the last digit entered. Point the remote at the device and press the POWER button. [. . . ] Check out our Web Site at: Replace your existing wall switches with the Wall Switch Module WS467. Other models available for 3-way and fluorescent lighting. 1 13 5 9 I M E A for more information on these and many other X10 products. Replace existing AC wall outlets with te h Receptacle Module SR227. Has one 15A/1800W controlled outlet and one outlet which is always on. Use the Mini Timer MT10A to program up to 4 X10 Modules to go on and off up to twice a day. CONTR OLLED http://www. x10. com http://www. x10. com Control a ceiling light, closet light, etc. [. . . ]