Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual X10 WS4777. We hope that this X10 WS4777 user guide will be useful to you.
Lastmanuals help download the user guide X10 WS4777.
You may also download the following manuals related to this product:
X10 WS4777 AUTRE NOTICE (128 ko)
Manual abstract: user guide X10 WS4777
Detailed instructions for use are in the User's Guide.
[. . . ] 3-Way Wall Dimmer Set Up and Operating Instructions Model WS4777 (WS477 + CS277)
WS477 Master
BLUE Common (to Live) BLACK BLUE RED Traveller wires RED
CS277 Companion
BLUE Common (to lamp)
The WS4777 Wall Dimmer Set is designed to control incandescent only lights with a rating of between 40W and 500W. Lights rated below 40W might flicker or operate erratically. [. . . ] · Replace one of the existing wall switches with the WS477 Wall Dimmer (Master): Connect the common wire to the BLUE wire on the WS477 using a wire nut. Connect the two remaining "traveller wires" to the RED and BLACK wires on the WS477, using wire nuts. If one of the travellers is red connect it to the RED wire on the WS477. · Replace the other existing wall switch with the CS277 Companion Switch: Connect the common wire to one of the CS277's BLUE wires. Connect the traveller which you connected to the RED wire on the WS477 to the RED wire on the CS277. Connect the remaining traveller wire to the second BLUE wire on the CS277. Screw both switches into their wall boxes (don't replace the wall plates yet). Setting up and operating the Wall Dimmer Module: · Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s). · Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller. · Set the power on-off slide switch (under the push button) to the ON (center) position. Turn this switch OFF (left) when changing a light bulb. · Turn the power back on at the circuit breaker panel. [. . . ] If service is required under this warranty: Call 1-800-442-5065, visit www. x10. com, or e-mail sales@x10. com.
X10. com, a division of X10 Wireless Technology, Inc. http://www. x10. com/support
WS4777-10/02 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE X10 WS4777
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual X10 WS4777 will begin.
X10 WS4777 AUTRE NOTICE (128 ko)
