User manual X10 XCAM2 INSTANTON XX20A

[. . . ] Plug its power supply into a standard wall outlet and the other end into the video receiver. Connect the video receiver to your TV. OWNER'S MANUAL PLEASE KEEP FOR FUTURE REFERENCE For help or more information on setup, please visit: http://www. x10. com/support X10. com, a division of X10 Wireless Technology, Inc. 3824 North 5th St. , Suite C, 2 North Las Vegas, NV 89032. XCam2-12/02 Plug the camera's power supply into a standard wall outlet. [. . . ] Set up your first camera and your video receiver according to the instructions in steps 1 thru 7. Plug in the transceiver module and extend the antenna. Remove the battery cover and put four AAA batteries into the remote. Make sure to match the batteries to the + and ­ marks inside the battery case. Options Mounting the Camera You can attach your camera to a wall using the supplied screws. Turn on your TV and select its video input. Use the Video or Select buttons on your TV remote control, or try channel 0 and then Channel Down. The camera's picture should appear. 5 6 7 8 Multi-Camera Systems, cont. 5. Press 1 Off on the remote control to turn the first camera off. Multi-Camera Systems, cont. Switching Cameras with the Remote To switch from one camera to another with the remote control, simply press the On button for that camera. For example, press 2 On to switch from the current camera to camera 2. When you do that, the current camera switches off and camera 2 switches on, displaying its picture. You can also try moving the video receiver itself to another location near the TV. Sometimes moving it just a foot can make a big difference. If the camera picture still doesn't improve after adjusting the antennas and receiver position, try changing the channels on the camera and video receiver. The channel switch is on the top of the camera (under the rubber plug) and the bottom of the wireless video receiver. Change the setting on both the camera and video receiver, making sure they are set to the same letter (A, B, C, or D). Try different letter settings to see if the picture improves. If the picture is out of focus: The camera is shipped with the focus preset for optimal use. You can adjust the focus by turning the lens. If you turn it clockwise do not force or overtighten it. If you can't switch cameras: If you have a multi-camera setup and are having trouble switching, start by unplugging all the cameras but one. Use your remote control to turn the remaining camera on and off. [. . . ] See your TV's owner's manual if you still aren't sure how to change the video source. Make sure your camera is connected to power and turned on. Follow the setup steps again (steps 1 thru 7 ), and check that you have done each step correctly. Make sure that the ABCD switches on the top of the camera and the bottom of the wireless video receiver are set to the same letter. [. . . ]