User manual XACT REPLAY XTR8CK INSTRUCTION MANUAL

[. . . ] Pause Rewind Replay L I V E S AT E L L I T E R A D I O Model XTR8CK Instruction Manual To activate your XACT Sirius Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www. sirius. com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www. getxact. com. KEEP ON LISTENING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] As you are listening to the playback of the stored audio, you may either fast forward or rewind through the stored audio by pressing the Fast Forward or Rewind buttons, without having to press the Pause/Play button first. Refer to the previous sections describing the Rewind and Fast Forward buttons for specific instructions for their use. Note: If the Receiver is tuned to another channel while in the Instant Replay mode, the Instant Replay mode is exited, all the audio stored in the Instant Replay memory is erased, and the tuned channel begins to play. Also note that tuning to another channel may automatically occur if another feature of the Receiver has been programmed to do so. When the Instant Replay mode is active, status information is shown at the bottom of the Receiver's display screen. The Instant Replay mode icon that is displayed at the bottom left of the screen indicates the current mode. Pause mode- This indicates that the Receiver is paused and muted. Play mode- This indicates that you are in the Instant Replay playback mode, listening to stored audio. Fast Forward mode- This indicates that you are fast forwarding through the stored Instant Replay audio. Rewind mode- This indicates that you are rewinding, or moving backwards, through the stored Instant Replay audio. 31 The Progress Bar is a visual indicator of the status of the Instant Replay memory. As the memory fills, the Progress Bar begins to fill from the left side providing a visual indication of how much of the Instant Replay memory is filled. The end of the bar indicates the end of the stored audio, where the live broadcast begins. When all available memory has been used, the bar will be completely filled. A diamond-shaped Play Position indicator is superimposed over the Progress Bar which provides a visual indicator of the current playback position in the Instant Replay memory. The Play Position indicator shows your current listening position in the stored audio. When you press the Pause/Play button to begin playback of the stored audio, this indicator will begin to move to the right showing the progression of the playback through the Instant Replay memory, provided that the memory is not full. 32 The portion of the Progress Bar behind the Play Position indicator shows how much you can rewind in the Instant Replay memory, while the filled portion ahead of the Play Indicator shows how much you can fast forward in the memory. While you are in the playback mode, the Receiver continues to store the audio from the channel. Obviously, you will be unable to "catch up" to the live broadcast during playback, as new audio is being stored at the same rate at which you are playing back the stored audio. You can use the Fast Forward button to skip ahead or exit the Instant Replay mode, and begin listening to the live broadcast again. Should you press the Pause/Play button to stop the playback, the play position indicator will stop moving and continue to provide a visual indication of your current position in the Instant Replay memory. When the Instant Replay memory is 10 seconds from becoming full, two beeps will be heard (if the Confirmation Tone option is enabled). When the memory is full, the Receiver will automatically begin playback, and will continue to store the audio, overwriting the oldest portion of the previously stored audio content. When the memory is full, you will be unable to rewind through the stored audio. If you have partially played back the stored audio, and have paused the Receiver again, the Play Position indicator will begin to move left when the Instant Replay memory becomes full, as it begins overwriting the oldest portion of the audio previously stored. When the Play Position indicator reaches the left-most position, indicating that the memory is full, the Receiver will automatically begin playback. The Instant Replay Time Position provides the exact amount of time the Play Position indicator is behind the live broadcast, expressed as Hours:Minutes:Seconds, and are displayed as a negative number. (Hours are only displayed if the amount of time is greater than one hour. ) For example, if -02:40 is displayed, this would indicate that the Play Position indicator is 2 minutes and 40 seconds behind the live broadcast. 33 Menu Options To enter the Menu Options page of the Receiver, press the MENU button. [. . . ] When no antenna is detected and the signal is lost, a window appears with the message "Antenna Disconnected" and it is displayed until an antenna is detected and the signal is acquired. Satellite reception is intermittent or weak and audio is cutting in and out or is unclear. Check that the satellite antenna is connected and not faulty. Change the location of the Antenna making sure it is away from obstructions, see page 58. 61 WARRANTY Warranty Information XACT Communication One-Year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities regarding your product. [. . . ]