User manual XACT STREAM-JOCKEY II XTR2CK INSTRUCTION MANUAL

[. . . ] Instruction Manual Model XTR2CK To activate your Satellite Radio Receiver or for latest news and questions regarding SIRIUS® Satellite Radio service visit sirius. com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www. getxact. com. KEEPMOVING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Press the button, and the follow-up screen will be displayed. Replace Artist/Song Title Artist/Song Title Artist/Song Title Artist/Song Title Artist/Song Title 3b. Press the or button to scroll the the programs. button to replace with the new selection. Cancel: To avoid overwriting the stored selection, wait for the original screen to be displayed again. 16 Performing the S-Seek Function Whenever you turn your satellite radio on, it automatically searches the incoming signal to determine if a match exits between the signal and the artist/composers or song titles that you have recorded in memory (except when S-Seek is set to Off). 1. The recorded programs lists is displayed. Two selectable options displayed on the screen. Select "Off" (to deactivate the programs searching) or "On" (to activate the program searching) by using the or button, then press button to confirm the setting. Memory Recall Delete S-Seek Category 12:00P S-Seek On Off Category 12:00P Deleting the Recorded Programs (Artist/Song) 1. The recorded programs list is displayed. button to scroll through programs. button again to confirm the setting. Memory Recall Delete S-Seek Category 12:00P 17 Delete Yes No Category 12:00P MENU OPTIONS SETTINGS The following options are included on the Menu Options list: · SIRIUS® ID · Display Settings · FM Transmitter · Channel Add/Skip · Lock Options · Audio Level · Antenna Aiming · Memory Options · Time Features · Factory Default BASIC SETTING PROCEDURE 1. The Menu Options list is displayed on the screen. or button to select a desired item button, and the selected Option Setting pops up. 4. Set the Option Setting to your preference according to the steps described below. To exit the Menu Options list, press and hold the button. SIRIUS® ID Refer to "Make a Note of Your Identification Number" for details. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P 18 Display Settings Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P The following adjustments can be made: · Brightness Control · Contrast Control Brightness Control: A 10-segment horizontal bar graph is displayed. Move the button to adjust the dimming control function accordingly. By pressing the or action, you will return to the Menu Operations list. Brightness Control or left/right directional button or by taking no - + Contrast Control: A 10-segment horizontal bar graph is displayed. Move the or left/right directional button to adjust the contrast control function accordingly. By pressing the or button or by taking no action, you will return to the Menu Operations list. Contrast Control - + 19 FM Transmitter Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P The following adjustments can be made: · Frequency · FM On/Off FM Transmitter Frequency FM On/Off Category 12:00P Frequency: enables you to select any one of the pre-programmed FM channels. Press the or button to select a desired channel, then press the button to confirm the setting. To exit this function, press or button. Frequency 88. 1 MHz 88. 3 MHz 88. 5 MHz 88. 7 MHz 88. 9 MHz FM On/Off: To activate/deactivate the FM transmitter. FM On/Off On Off Category 12:00P 20 Channel Add/Skip You can add or skip new/unwanted channels while tuning. When you enter this option, a channel list is displayed, and the current channel playing will be highlighted. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P 001 002 003 004 005 006 Channel Channel Channel Channel Channel Channel Name Name Name Name Name Name Skip Skip Press the or button to navigate the list and highlight the channel you want to skip, then press the button to confirm the setting. A "Skip" message pops up next to the channel displayed. To activate the skipped channel again, repeat the same steps and delete the "Skip" message. While adding the channel, the message "Skip" is removed from alongside the channel name, and the system will no longer skip this channel. [. . . ] When no antenna is detected and the signal is lost, a pop-up window with the message "Antenna Not Detected" is displayed until an antenna is detected and the signal is acquired. Reception is weak or the audio has static and is unclear. Check that the satellite antenna is connected and not faulty. Change the location of the Antenna making sure it is away from obstructions, see page 24. 35 WARRANTY Warranty Information XACT Communication One-Year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities regarding your product. [. . . ]