User manual XENA XZZ6L

[. . . ] Don't forget to register your XENA lock at www. By purchasing the world's strongest, smartest portable lock (with alarm inside), you've made life very difficult for a would-be thief. please read these instructions carefully. [. . . ] Replace battery cover and insert module back into lock body immediately · Warning: When the alarm module is separated from the lock body the alarm To avoid this please insert the module into the lock body immediately after inserting the battery *For more product details, please check with your local XENA dealer or visit www xenasecurity. Under normal use, batteries should last at least 8 months. 10 seconds after the arming beep, shock & motion sensors work independently to determine if your bike is being tampered with. Warning: Extremely loud alarm, avoid close proximity with ears. Each lock comes with three keys and a flat coded key with serial number (ie, X123456). Use this identification number to order keys for your lock. Make a note of serial number and keep it in a safe place. The unit automatically senses the presence of your brake disc. The alarm sensors will become active 5 seconds after being locked on your brake-disc. ENGLISH Alarm too sensitive: Place at 6 o'clock on disk. Alarm not sensitive enough: Place at 12 o'clock to 3 o'clock on disc. Use a dry cloth to keep the LED reflector plate inside the disc-slot clean and free of dirt, dust, grease and grime. An obstructed reflector plate can adversely affect performance and may cause the lock to arm when not on the brake disc. ⷠIt is recommended to add a lock lubricant to the lock barrel every six months. [. . . ] ⷠ10 seconds after you hear the arming beep, the shock and motion sensors are active. *For more detailed troubleshooting visit www xenasecurity. Alarm not arming: Check battery, Ensure the reflector (fig C) is obstructed by motorcycle disc, confirm sensors are active (see below). [. . . ]