User manual XEROX 4112

[. . . ] Version 3. 1 September 2010 Xerox® 4112TM/4127TM Enterprise Printing Systems User Guide © 2010 Xerox Corporation. Xerox, the sphere of connectivity design, and Xerox 4112/4127 Enterprise Printing Systems, are trademarks of Xerox Corporation in the United States and/or other countries. Microsoft, MS-DOS, Windows, Microsoft Network, and Windows Server are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Novell, NetWare, IntranetWare and NDS are registered trademarks of Novell, Inc. in the United States and other countries. [. . . ] Remedy: Check the staple cartridge and reset correctly. Cause: PDL (Printer Description Language) error detected by the FreeFlow Print Services Controller while processing a network print job. Remedy: Cancel and resend the print job. If problem continues, reboot both the FreeFlow Print Services Controller and the printer and resend job. If the problem persists, call the Customer Support Centre for further help/instructions. Cause: Disk full error message on the FreeFlow Print Services Controller. Delete unwanted files from the FreeFlow Print Services Controller. Cause: An error occurred with the machine. Remedy: Contact the Customer Support Center. Cause and Remedy 024-976 024-977 024-978 024-979 O O O O 024-980 024-981 024-982 O O O 024-983 024-984 024-985 024-987 O O O O 024-988 O 024-989 027-770 O O 027-771 O 065-210 O Xerox 4112/4127 EPS User Guide 7-17 Problem Solving Category Error Code Print/Other 071-210 O Cause: Paper Tray 1 malfunctioned. Remedy: Contact the Customer Support Center. Trays other than Paper Tray 1 can be used. Remedy: Contact the Customer Support Center. Trays other than Paper Tray 2 can be used. Remedy: Contact the Customer Support Center. Trays other than Paper Tray 3 can be used. Remedy: Contact the Customer Support Center. Trays other than Paper Tray 4 can be used. Cause: Paper Tray 5 (bypass) malfunctioned. If the tray error is not fixed by performing the relevant remedy, contact the Customer Support Center. Cause: A "Pretransfer sensor ON" indicates a jam; this jam may be caused by any of the following conditions: An error by the Pretransfer sensor, a worn fuser roll, foreign material (such as paper) in the machine, or using media stock that is not supported by the machine. Cause: High Capacity Feeder Tray (paper trays 6 to 7) malfunctioned. Remedy: Check the paper setting of paper trays 6 and 7 and power-cycle the machine. [. . . ] It is a versatile, reliable, and widely supported bitmap format designed for exchanging digital information. Transmission Control Protocol/Internet Protocol: Commonly used network communications protocol supported by the FreeFlow Print Server. It is a set of data communications protocols, or a type of "language" that the devices use to "speak" with each other. The measurement of the speed of a printer, expressed in pages per minute. [. . . ]