User manual XEROX DOCUMENT CENTRE 440

[. . . ] After changes are completed or if no changes are needed continue to Fig. 7 Refer to the charts of the Administration Settings- Copy Mode Part 2 of 2 pamphlet for settings value. Fig. 3 Select System Settings Administration Setting Copy Mode - 1 of 4 Quick Start Guide Administration Setting Copy Mode - 2 of 4 Basic Copy Presets 1. [. . . ] 3 Select System Settings Administration Setting Copy Mode - 1 of 4 Quick Start Guide Administration Setting Copy Mode - 2 of 4 Basic Copy Presets 1. Paper Tray- 2nd to 4th Buttons (The defaults are as follows from the top. 2nd button: 1 as Tray 1, 3rd button: 2 as Tray 2, 4th button: 3 as Tray 3. ) Setting Description 1 Tray 1 2 Tray 2 3 Tray 3 4 Tray 4 5 Tray 5 (Bypass) 4. Reduce/Enlarge- 3rd to 4th Buttons (The defaults are as follows from the top. 3rd button: 1 as 50%, 4th button: 2 as 70. . 7%. ) Setting Description 1 Ratio currently set to R/E Preset 1 2 Ratio currently set to R/E Preset 2 3 Ratio currently set to R/E Preset 3 4 Ratio currently set to R/E Preset 4 5 Ratio currently set to R/E Preset 5 6 Ratio currently set to R/E Preset 6 7 Ratio currently set to R/E Preset 7 Copy Defaults 5. Reduce/Enlarge (The default setting is 0) Setting Description 0 100% 1 Ratio currently set to R/E Preset 1 2 Ratio currently set to R/E Preset 2 3 Ratio currently set to R/E Preset 3 4 Ratio currently set to R/E Preset 4 5 Ratio currently set to R/E Preset 5 6 Ratio currently set to R/E Preset 6 7 Ratio currently set to R/E Preset 7 8 Auto% 6. Paper Supply (The default setting is 0) Setting Description 0 Auto 1 Tray 1 2 Tray 2 3 Tray 3 4 Tray 4 5 Tray 5 7. 2 Sided (The default setting is 0) Setting Description 1 1 ­ 2 Sided 2 2 ­ 1 Sided 3 2 ­ 2 Sided 0 1 ­ 1 Sides Copy Defaults 10. Sharpness (The default setting is 2) 21. Color Saturation (The default setting is 2) Setting Description 0 Higher 1 High 2 Normal 3 Low 4 Lower 22. Color Shift (the default setting is 2) Settings Value Description 0 Coolest 1 Cool 2 Normal 3 Warm 4 Warmest 27. Original Orientation (The default setting is 0) Setting Description 0 Head to Top 1 Head to Left 28. Image Rotation (The default setting is 1) Setting Description 0 Always On 1 On during Auto 2 Off 29. Rotation Direction (The default setting is 1) Setting Description 0 Auto (only when the finisher is installed) *the default setting is 0 when the finisher is installed. 1 Portrait Original-Left Edge 2 Portrait Original- Right Edge Copy Control 1. Auto Paper Off (The default setting is 1) Setting Description 1 Select Tray 1 2 Select Tray 2 3 Select Tray 3 4 Select Tray 4 2. [. . . ] Rotation Direction (The default setting is 1) Setting Description 0 Auto (only when the finisher is installed) *the default setting is 0 when the finisher is installed. 1 Portrait Original-Left Edge 2 Portrait Original- Right Edge Copy Control 1. Auto Paper Off (The default setting is 1) Setting Description 1 Select Tray 1 2 Select Tray 2 3 Select Tray 3 4 Select Tray 4 2. [. . . ]