User manual XEROX DOCUPRINT M760 INSTALLATION

[. . . ] Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions. Technical updates will be included in subsequent editions. Printed in the United States of America 2 y Quick Network Install Guide Contents Contents Purpose of This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click on Ethernet and select the device. Choose your printer device from the list then click OK. The Wizard will return you to the previous dialog. Verify the port name you entered is in the list and correct. The check box to the left of the port name must be checked if it is not, check it then select Next>. Insert your printer CD-ROM and click Have Disk. 13 20 y Quick Network Install Guide Windows NT 4. x Network 14 15 16 17 18 19 20 21 22 Click the Browse button and select the directory containing the Windows NT drivers (<CD Drive>:\instal\winnt40) then click Open. The Wizard will return you to the previous dialog. Verify the path and file name are correct and click OK. At the next dialog, enter a name for the printer and select whether you want that printer to be the default then click Next>. If the printer will not be shared, click Next>. To share the printer, enter a Share Name, check the share checkbox, then click Next>. Verify the path and filename are correct and click OK. At the next dialog, enter a name for the printer and select whether you want that printer to be the default then click Next>. 24 y Quick Network Install Guide Windows 2000 Network 23 24 25 If the printer will not be shared, click Next>. To share the printer, enter a Share Name, check the share checkbox, then click Next>. At the next dialog it is recommended that you print a test page. The Completing the Add Printer Wizard window will come up. If all the cata presented is correct, click the Finish button. If not, click the <Back button to correct any errors. A new dialog will ask for confirmation of the test print, click Yes. Send a print job to the printer. 26 27 Quick Network Install Guide y 25 Windows 2000 Network 28 Check the print job for print quality. If print quality problems exist, use the print quality section of your printer System Administrator Guide to correct the problem. If your print job did not print, see the Troubleshooting section for your operating system in the Technical Information Guide to correct the problem. 29 Printers connected to a Windows 2000 network with TCP/IP protocol enabled can use a Web Browser to monitor and configure your printer. [. . . ] TCP/IP address is assigned automatically by the Server. TCP/IP address is assigned automatically by the Server. Dynamic Addressing RARP/BOOTP Dynamic Addressing DHCP (Dynamic Host Resolution Protocol) This appendix contains procedures for each of these methods. Determine which method will be used for your network and follow the steps of the appropriate procedure. Quick Network Install Guide y 45 Appendix B: Set an IP Address For DocuPrint Networked Printers Static Addressing The printer is assigned a TCP/IP address by a network administrator and this address is manually input to the printer. Perform the steps below: 1 2 Press Menu Up or Menu Down until you see: Menu Ethernet Menu Press Item Up or Item Down until you see: Ethernet Menu IP Address Res 3 Press Value Up or Value Down until you see: IP Address Res Static 4 5 6 Press Enter Press Item Up or Item Down until you see: Ethernet Menu IP Address Press Value Up or Value Down until you see: IP Address xxx. xxx. xxx. xxx 46 y Quick Network Install Guide Appendix B: Set an IP Address 7 Use Value Up or Value Down to increment the underlined value in the IP Address by 1 each time the key is pressed. [. . . ]