User manual XEROX DOCUTECH 90 USING THE CLIENT SOFTWARE FOR SOLARIS

[. . . ] Xerox Document Services Platform Series Using the Xerox Client Software for Solaris 701P37504 DocuSP 3. 1 October 2001 Xerox Corporation Global Knowledge and Language Services East Coast Operations 800 Phillips Road, 845-17S Webster, New York 14580 USA © 2001 Xerox Corporation. Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or hereinafter granted including without limitation, material generated from the software programs that are displayed on the screen such as styles, templates, icons, screen displays, looks, and so on. Printed in the U. S. A. , U. K. , and France. XEROX, XEROX Europe, XEROX Canada Limited, The Document Company, the stylized X, and all names and identifying numbers used in conjunction with Xerox products mentioned in this publication are trademarks of XEROX CORPORATION. [. . . ] The specified filename may contain the ­listFile option. Finishing option - bound ­ binding <left|right|none> Specify edge binding as a finishing option for the job. 2-4 Using the Xerox Client Software for Solaris Using the print command Finishing option ­ collated or uncollated ­collated or ­uncollated Set the finishing option to collated or uncollated. · · Collated prints the pages of a document in sequential order. Uncollated prints the requested number of copies of the first page of the document before printing the next page. Finishing option ­ other finishing devices ­finishing <finisher name> Specify an attached finishing device. The finishing device name must match the name defined by the System Administrator on the DocuSP controller. See the Print Service Operator for the list of defined device names. Finishing option ­ no finishing device ­nofinishing Specify no finishing when the job is printed. This option is useful for reprinting saved jobs that requested an external finishing device in the job ticket, and you wish to reprint the job with no finishing. To request no finishing for saved jobs that require binding or stitching, use ­binding none or ­stitching none. Finishing option - stitched ­ stitching <singlePortrait|singleLandscape|dualPortrait|dualLandsca pe|rightSinglePortrait|rightSingleLandscape|rightDualLan dscape|none> Specify a stitched option for finishing. If you use the "print -stitching" option and specify more than one file in the command line, the files will be stapled together. The dualLandscape option will give you a dual stitch regardless of the orientation of the image. The "stitching" option can also be used for a printer that staples. 2-5 Using the print command Using the Xerox Client Software for Solaris Help ­help Display a usage statement for the print command and options. All other command line option entries will be ignored. Image shift ­ x ­xImageShift <#> <unit> Specify the x (horizontal for portrait page) image shift. The point of origin is the lower left corner of the portrait page. The value of <unit> may be either "in" for inches or "mm" for millimeters. ­x2ImageShift <#> <unit> Specify the side 2 x (horizontal for portrait page) image shift. The point of origin is the lower left corner of the portrait page. Image shift ­ y ­yImageShift <#> <unit> Specify the y (vertical for portrait page) image shift. The point of origin is the lower left corner of the portrait page. The value of <unit> may be either "in" for inches or "mm" for millimeters. [. . . ] One of the following messages will be displayed: ­ Complete ­ CancelledByOperator ­ CancelledByUser ­ CompleteWithWarning ­ CompleteWithErrors ­ Rejected ­ Aborted Specified job ­i or ­I <job identification number> Display the status of the job with the given job identification number. 3-2 Using the Xerox Client Software for Solaris Print job status Specified job name ­j or ­J <job name> Display the status for all jobs with the specified job name. The system matches the information in the job name field against the job name in the original print request. Specified DocuSP controller ­server <DocuSP controller name> Display the status of the jobs currently at the specified DocuSP controller. If you do not use the ­server option, the query will be sent to the DocuSP controller listed in the /usr/xerox/dps/client/ cconf file. [. . . ]