User manual XEROX N2025 PARTS LIST

[. . . ] PL 4. 2 Paper Handler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Paper Transport PL 5. 1 Paper Transport. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exit Assembly Fuser PL 6. 1 Rear Cover Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL 6. 2 Fuser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame Drives PL 7. 1 Frame & Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Xerographics PL 8. 1 Xerographics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical PL 9. 1 Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that connector jack 1 is attached to one end of the wire harness and connector jack 2 is attached to the other end that is plugged into plug 2. A notation "(part of item 1. 1)" indicates that the part is included with item 1. 2. 1 (PL1. 2, line item 1). 6. 8. Organization of this Section The following elements make up the Parts List section:Parts Lists (PL)Each item number in the part numbers listing corresponds to an item number in the illustration. All the parts in a given subsystem of the machine will be located in the same illustration or in a series of associated illustrations. The parts which are not spared are indicated by "- -" in the Part column. Exploded View IllustrationsAn item that is called out on an illustration has a corresponding listing within this section. Components are given item numbers that correspond to the part number listings. All hardware dimensions are in millimeters unless otherwise noted. Assemblies and kits are a combination of several separate components. A bracket is used on the illustration when an assembly or kit is spared but is not shown. The item number of the assembly or kit precedes the bracket; the item numbers of the piece parts follow it. Part Number IndexThis index lists all the spared parts in the system in numerical order. Each number is followed by a reference to the parts list on which the part may be found. [. . . ] Folder Magnet 2000 Sheet Feeder Rear Cover/ Door Assembly Rear Bottom Cover Right Side Cover Assembly. Front Cover 2000 Sheet Feeder Frame & Drive Assembly (reference only) 2000 Sheet Feeder Tray Assembly Screw Foot Hardware Kit (Includes Screw) Parts-list PL 12. 1 02/2000 5-22 Initial Issue DocuPrint N2025/N2825 EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 PL 12. 2 2000 Sheet Feeder (2 of 4) Item 1 Part ----Description 2000 Sheet Feeder Frame & Drive Assembly. [. . . ]