User manual XEROX PHASER 6115MFP

[. . . ] Phaser® 6115MFP multifunction product User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www. xerox. com/support Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, ControlCentre®, Phaser®, Scan to PC Desktop®, and Walk-Up® are trademarks of Xerox Corporation in the United States and/or other countries. [. . . ] Load the originals to be copied and follow the steps below to make copies. For information on copy settings, see Adjusting Copy Options on page 7-3. Loading Originals 6115-078 6115-074 6115-075 Document Glass Lift the ADF cover and place the original facedown, towards the back, left corner of the document glass as shown. Automatic Document Feeder Insert originals faceup with the top of the page entering the feeder first. Adjust the paper guides so they fit against the originals. 1. On the control panel, press the Copy button. Specify the copy settings, see Adjusting Copy Options on page 7-3. Specify the number of copies using the control panel keypad. The number of copies appears on the upper, right corner of the display. Press the Start-Color button for color copies or Start-B&W button for black and white copies. If you placed originals in the ADF, copying continues until the document feeder is empty. To stop copying, press the Stop/Reset button. Note: If the Stop/Reset button is pressed while copying Press the Start Key To Resume appears on the control panel. To continue the copy job, press the Start-Color or Start B&W button. Phaser® 6115MFP Multifunction Product 7-2 Adjusting Copy Options Adjusting Copy Options This section includes: Setting the Original Document Type on page 7-3 Setting the Copy Quality on page 7-4 Setting the Copy Density on page 7-4 Collating Copies on page 7-5 Selecting Paper Priority on page 7-6 Specifying a Zoom Ratio on page 7-7 If you are connected to your product via USB, you can change copy settings through the MFP ControlCentre (MCC). For instructions on using the MFP ControlCentre, see the chapter on Product Management on page 3-1. If you are connected to your product over a network, use the control panel to adjust copy options. Note: Pressing the Stop/Reset button returns all settings to their default values. Setting the Original Document Type For the best print quality, set the original document type to a mode that most closely matches your originals. To set the original document type: Using the MFP ControlCentre 1. Open the MCC, connect to your product and download the current . dat file. Select Mix, Text, or Photo from the items. If you selected Text: Select Auto, to let the product manage the density level. Select Manual if you want to manually adjust the density level. Upload the new settings to the product. Using the Control Panel 1. On the control panel, press the Copy button. [. . . ] Only plain and letterhead paper are compatible with duplex (2-Sided) printing. Before scanning in Scan mode, specify the network settings in the NETWORK SETTING menu. Before sending scan data using onetouch dial keys or speed dial numbers, register an email address with the one-touch dial key or speed dial number. LOAD CORRECT PAPER Duplex (2-Sided) printing is specified, but no paper compatible with duplex (2-Sided) printing is loaded. The network settings had not been completely specified when the machine was switched to Scan mode. [. . . ]