User manual XEROX PHASER 6180

[. . . ] Phaser® 6180 color laser printer User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www. xerox. com/support Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, Phaser®, PrintingScoutTM, and Walk-Up® are trademarks of Xerox Corporation in the United States and/ or other countries. [. . . ] From the Start menu, click Printers and Faxes, and then display the properties of the printer to be used. Use the Details list box to select the custom setup you want to define. Phaser® 6180 Color Laser Printer 4-39 Printing Custom Size or Long Paper 5. Specify the length of the short edge and long edge under Setting For. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. To assign a paper name, select the Name Paper Size check box, and then enter the name in Paper Name. Up to 14 characters can be used for the paper name. If necessary, repeat steps 4 to 6 to define another custom size. Click OK twice. Using the PostScript Driver On the PostScript print driver, set the custom size in the Custom Paper Size dialog box. This section explains the procedure using Windows XP as an example. From the Start menu, select Settings, click Printers and Faxes, and then display the properties of the printer to be used. From Paper Size, select Custom Paper Size. Specify the length of the short edge and long edge under Setting For. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. Click OK. Printing on Custom Size Paper Use the following procedures to print using either the PCL or PostScript drivers. Using the PCL Driver The procedure to print on custom size paper using the PCL print driver is as follows. Note: The way to display the printer Properties dialog box differs according to the application software. Refer to the manual of your respective application software. Select this printer as the printer to be used and click Preferences. Select the appropriate paper tray from Paper Tray. [. . . ] Press the Up Arrow or Down Arrow button until the desired meter is displayed. After checking, press the Menu button. Phaser® 6180 Color Laser Printer 8-9 Moving the Printer Moving the Printer Carry out the following procedure when moving the printer. To view precautions and guidelines for safely moving your printer, see User Safety on page 1-2. The printer, configured with the optional accessories, paper trays, consumables and paper, weighs 29. 5 kg (64. 5 lb. ). [. . . ]