User manual XEROX PHASER 3200MFP

[. . . ] Phaser 3200MFP User Guide 604E39320 ©2007 by Xerox Corporation. Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or hereinafter granted, including without limitations, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks etc. All Xerox products mentioned in this publication are trademarks of Xerox Corporation. Product names and trademarks of other companies are hereby acknowledged. The information in this document is correct at the time of publication. [. . . ] When the uninstallation is complete, click Quit. Make sure that you connect your printer to the computer. Turn on your computer and printer. 2. Insert the CD-ROM which came with your printer into the CD-ROM drive. Double-click CD-ROM icon that appears on your Macintosh desktop. Double-click the Xerox ScanThru Installer icon. After the installation is finished, click Quit. Xerox Phaser 3200MFP 6-47 6 Printing Uninstalling the Scan driver 1. Insert the CD-ROM which came with your printer into the CD-ROM drive. Double-click CD-ROM icon that appears on your Macintosh desktop. Double-click the Xerox ScanThru Installer icon. Select Uninstall from the Installation Type and then Click Uninstall. When the uninstallation is complete, click Quit. Setting Up the Printer Set up for your printer will be different depending on which cable you use to connect the printer to your computer--the network cable or the USB cable. For a Network-connected Macintosh 1. Follow the instructions on Installing Software for Macintosh on page 6-46 to install the PPD and Filter files on your computer. 2. Open Print Center or Printer Setup Utility from the Utilities folder. Select the AppleTalk tab. The name of your machine appears on the list. Select XRX000xxxxxxxxx from the printer box, where the xxxxxxxxx varies depending on your machine. 5. If Auto Select does not work properly, select Xerox in Printer Model and your printer name in Model Name. Your machine appears on the Printer List and is set as the default printer. 6-48 Xerox Phaser 3200MFP 6 Printing For a USB-connected Macintosh 1. Follow the instructions on Installing Software for Macintosh on page 6-46 to install the PPD and Filter files on your computer. 2. Open Print Center or Printer Setup Utility from the Utilities folder. If Auto Select does not work properly, select Xerox in Printer Model and your printer name in Model Name. Your machine appears on the Printer List and is set as the default printer. Printing NOTE: The Macintosh printer's properties window that appears in this User Guide may differ depending on the printer in use. [. . . ] Construction: Prior to printing, envelopes should lie flat with less than 0. 25 inches (6 mm) curl, and should not contain air. Condition: Envelopes should not be wrinkled, nicked or otherwise damaged. Temperature: You should use envelopes that are compatible with the heat and pressure of the machine. Size: You should only use envelopes within the following size ranges. [. . . ]