User manual XEROX PHASER 6130

[. . . ] Phaser® 6130 printer User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www. xerox. com/support Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, Phaser®, PrintingScout®, and Walk-Up® are trademarks of Xerox Corporation in the United States and/ or other countries. [. . . ] Select Glossy Paper, and then press the OK button. In the printer driver, select either Glossy Paper as the paper type or the appropriate tray as the paper tray. Phaser® 6130 Printer 4-30 Printing Custom Size Printing Custom Size This section explains how to print on custom size paper, such as long paper using the PCL print driver. Custom size paper can be loaded in each tray. The way to load custom size paper in the paper tray is the same as the one to load standard size paper. See also: Loading Paper in the Manual Feed Slot on page 4-12 Loading Paper in the Paper Tray on page 4-8 Setting Paper Types and Sizes on page 4-7 Defining Custom Paper Sizes Before printing, set the custom size on the print driver. Note: When setting the paper size on the print driver and control panel, be sure to specify the same size as the actual paper used. Setting the wrong size for printing will cause printer failure. This is especially true if you configure a bigger size when using a narrow width paper. Using the PCL Driver On the PCL print driver, set the custom size in the Custom Paper Size dialog box. This section explains the procedure using Windows XP as an example. For Windows 2000 or later, an administrator's password only allows users with administrator rights to change the settings. Users without the rights of administrator can only check the contents. When configuring the Custom Paper Size dialog box in Windows 2000 or later, settings of other printers on the computer will also be affected as the form data base of the computer is used by a local printer. For a shared printer on the network, settings of other shared printers on the same network in another computer will also be affected as the form data base on the server with existing print queue is used. From the Start menu, click Printers and Faxes, and then display the properties of the printer to be used. Use the Details list box to select the custom setup you want to define. Specify the length of the short edge and long edge under Setting For. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. Phaser® 6130 Printer 4-31 Printing Custom Size 6. To assign a paper name, select the Name Paper Size check box, and then enter the name in Paper Name. Up to 14 characters can be used for the paper name. If necessary, repeat steps 4 to 6 to define another custom size. [. . . ] Three meters are available: Total Impressions, Color Impressions, and Black Impressions. The billing meter counts the number of pages printed properly. Single side print (including N-up) is counted as one impression. When printing color data, that has been converted by using ICC profile on an application, with the Color (Auto) setting, the data is printed by color even if it seems to be black and white data on the monitor. [. . . ]