User manual XEROX PHASER 7500

[. . . ] Microsoft®, VistaTM, Windows®, and Windows ServerTM are trademarks of Microsoft Corporation in the United States and/or other countries. As an ENERGY STAR® partner, Xerox Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR name and logo are registered U. S. marks. Contents Contents 1 Printer Information 1-2 1-2 1-3 1-3 1-4 1-6 1-7 User Safety . [. . . ] From Paper Size, select the size of the original document. Click OK. Phaser® 6125 Color Laser Printer 4-25 Printing on Specialty Media Printing Glossy Paper Glossy paper can be printed from any tray. To order paper, transparencies, or other specialty media, contact your local reseller or go to www. xerox. com/office/6125supplies. Guidelines Do not open sealed packages of glossy paper until you are ready to load them into the printer. Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until ready to use. Remove all other paper from the tray before loading glossy paper. Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the tray when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal. Long periods of storage in extreme conditions can cause glossy paper to curl and jam the printer. Printing Glossy Paper from the Paper Tray 1. Gently pull open the paper tray, and open the paper guides. 6125-080 Phaser® 6125 Color Laser Printer 4-26 Printing on Specialty Media 2. Open the output tray to hold the printed sheets. 6125-021 3. This is especially true if you configure a bigger size when using a narrow width paper. Using the Driver On the print driver, set the custom size in the Custom Paper Size dialog box. This section explains the procedure using Windows XP as an example. For Windows 2000 or later, an administrator's password only allows users with administrator rights to change the settings. Users without the rights of administrator can only check the contents. When configuring the Custom Paper Size dialog box in Windows 2000 or later, settings of other printers on the computer will also be affected as the form data base of the computer is used by a local printer. For a shared printer on the network, settings of other shared printers on the same network in another computer will also be affected as the form data base on the server with existing print queue is used. From the Start menu, click Printers and Faxes, and then display the properties of the printer to be used. Use the Details list box to select the custom setup you want to define. Specify the length of the short edge and long edge under Setting For. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. [. . . ] When the read only password is "ronly", and to check the printer status: #Password ronly #Status 2. When the full access password is "admin", and to set the recipient e-mail address to "service@xerox. com": #Password admin #SetMsgAddr service@xerox. com 3. When the full access password is "admin", and to set the recipient e-mail address to "service@xerox. com", then confirm the setting result on the network settings list: #Password admin #SetMsgAddr service@xerox. com #NetworkInfo Note: Describe the "#SetMsgAddr" command before the "#NetworkInfo" command. If they are written in reverse, the information retrieved by the "#NetworkInfo" command and the result of executing the "#SetMsgAddr" command may differ. Phaser® 6125 Color Laser Printer 8-8 Checking Page Counts Checking Page Counts The total number of printed pages can be checked at the control panel. [. . . ]