User manual XEROX WORKCENTRE 5135 QUICK USE GUIDE

[. . . ] WorkCentre® 5632/5638/5645/5655/5665/5675/5687 Quick Use Guide 604P19210C MAXIMISE YOUR PRODUCTIVITY. . . . . . by taking advantage of all the capabilities of your device. An Interactive User Guide CD is supplied with your product. The CD provides animated tutorials and interactive screens. When installed on your network it will always be available to everyone, or load it on your hard drive for easy access. Prepared by: Xerox GKLS European Operations Bessemer Road Welwyn Garden City Hertfordshire AL7 1BU ENGLAND ©2008 Xerox Corporation. [. . . ] Office Finisher Holds up to 250 sheets of paper in the Top Tray, and up to 2000 sheets in the Stacker Tray. The stacker can collate, stack, staple and hole punch your output depending on the features selected. The staple cartridge for the Office Finisher contains a minimum of 3000 staples. Advanced Holds up to 250 sheets of paper in the Top Tray, and up to 1500 sheets in the Stacker Tray. Office Finisher The Advanced Office Finisher can collate, stack, staple and hole punch your output depending on the features selected. The finisher stapler has 1 staple cartridge containing 5000 staples. Professional Holds up to 250 sheets of paper in the Top Tray, and up to 1500 sheets in the Stacker Tray. Finisher The Professional Finisher can collate, stack, staple and hole punch your output depending on the features selected. The Professional Finisher also incorporates a Booklet Maker which can fold and staple your output. The Booklet Maker stapler requires 2 staple cartridges, each containing 2000 staples. The finisher stapler has 1 staple cartridge containing 5000 staples. High Volume This finisher can hold up to 250 sheets of paper in the top tray, and up to 3000 sheets of paper Finisher in the stacker tray. The optional Tray 6 (Inserter) can be installed on this finisher. The stacker can collate, stack, staple and hole punch your output, depending on the features selected. High Volume This finisher can hold up to 250 sheets of paper in the top tray, and up to 3000 sheets of paper Finisher with in the stacker tray. The optional Tray 6 (Inserter) can be installed on this finisher. Booklet Maker The stacker can collate, stack, staple and hole punch your output, depending on the features selected. The finisher incorporates a booklet maker that will fold and staple your output. A C\Z Folder (tri-fold) is available as an option. Quick Use Guide Page 9 Product Overview Basic Office Holds up to 250 sheets of paper in the Top Tray, and up to 1000 sheets in the Stacker Tray. Finisher The Stacker can collate, stack and staple your output, depending on the features selected. The staple cartridge for the Basic Office Finisher contains a minimum of 3000 staples. Product Overview Page 10 Quick Use Guide Getting Started Control Panel Overview Features Displays the job features on the screen. Help Accesses additional information. Access Accesses Tools, used to adjust the defaults of the machine. Job Status Displays job progress information. Language Changes text to an alternative language. Clear All Resets all the features to their default settings. Machine Status Displays the current status of the machine. Interrupt Temporarily stops the current job to allow a priority job to be run. Power Saver Indicator Indicates when the machine is in Power Saver Mode. Pause Temporarily stops the current job. Asterisk * to start a DTMF (Dual Tone Use Multi-frequency) operation. Start Starts the job. Dial Pause Enters a pause in a telephone number when transmitting a fax. Hash Touch Screen Displays and selects all the available programming features, plus fault clearance procedures and general machine information. Indicates the dialing character or designates a group dial number. [. . . ] You cannot maintain or service any of the parts that are behind these covers and guards. Do NOT attempt any maintenance procedure that is NOT specifically described in the documentation supplied with your machine. Cleaning the Machine WARNING: When cleaning the machine do NOT use organic or strong chemical solvents or aerosol cleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials only as directed in this documentation. [. . . ]