User manual XEROX WORKCENTRE 7335

[. . . ] Xerox®, The Document Company®, the digital X® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Product names and trademarks of other companies are hereby acknowledged. Pause PC Use to pause a print job Printing Reports 2-Sided Copy Output Reduce/ Enlarge Lighten/ Darken Paper Supply Use to display a list of available reports for printing Use to make one or two-sided copies Use to collate outputs in copy mode Use to reduce or enlarge the image Use to adjust image contrast level Use to select the required paper supply source Speed Dial Use to enter a 2 digit Speed Dial number which has been stored in the machine's phone book memory Pause/ Redial Numeric Keypad Start Stop Clear/ Clear All Machine Graphic Use to redial the last phone number called or to add a pause Use to enter characters, or to choose special functions in conjunction with the Menu button Use to start a job Use to stop an operation Use to clear selections and entries Illuminates when a system error occurs If required, connect your answering machine and/or telephone to the EXT jack and connect the telephone line cord from the wall jack to the LINE jack. CAUTION: Shut down your computer before connecting the cable. [. . . ] Your equipment is equipped with an energy saving device to conserve power when the machine is not in use. The machine may be left on continuously. Unplug this product from the wall outlet before cleaning. Always use materials specifically designated for this product. Use of other materials may result in poor performance and could create a hazardous situation. Follow the instructions in the User Guide for proper cleaning methods. Never use supplies or cleaning materials for purposes other than those for which they were intended. Keep all supplies and materials out of reach of children. Do not use this product near water, wet locations, or outdoors. Do not place this product on an unstable cart, stand or table. The product may fall, causing personal injury or serious damage to the product Slots and Openings in the cabinet and in the back and sides of the product are provided for ventilation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this equipment not specifically approved by the XEROX Corporation may void the user's authority to operate this equipment. Shielded cables must be used with this equipment to maintain compliance with FCC regulations. WARNING:Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. With specific regard to lasers, the equipment complies with laser product performance standards set by governmental, national and international agencies as a Class 1 Laser Product. It does not emit hazardous radiation as the beam is totally enclosed during all phases of customer operation and maintenance. This 1989 Regulation places a duty on all employers and self-employed persons to ensure the electrical system in their premises is constructed, maintained and operated in such a manner as to prevent, so far as reasonably practical, danger. this includes ensuring all electrical equipment connected to such electrical systems safely constructed , maintained and operated. All Xerox equipment has been designed to exacting safety standards and has undergone a variety of stringent safety tests including earth bond, insulation resistance and electrical strength tests. Xerox Limited manufacturing plants have been awarded ISO 9000 quality certification and are subject to regular audits by the British Standards Institution or equivalent national standards body. [. . . ] This applies at any time during or after the service warranty period. If you find the telephone line is damaged or the telephone company notifies you that your machine is causing damage, disconnect the machine from the telephone line and call for service. Do not reconnect the machine until necessary repairs are made. The telephone company will, where practical, notify you when they need to temporarily disconnect service. [. . . ]