User manual XEROX WORKCENTRE 7345

[. . . ] Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions. Document Version 3. 0: February 2010 Table of Contents 1 Introduction Compatibility . [. . . ] The Authentication Configuration screen displays. Xerox Common Access Card Common Access Card Installation Guide 15 Installation Enter the Smart Card Timeout required between 1 and 120 minutes. If the machine is inactive for the period of time specified, it will end the session automatically. Note: When the Common Access Card is removed, the user session will timeout. Xerox WorkCentre 5632/5638/5655/5665/5675/5687, Xerox WorkCentre 5135/5150 and Xerox WorkCentre 5735/5740/5755/5765/5775/5790: a. Select Security and select Authentication Configuration. Note: If this is the first time you are entering the authentication wizard, you may be prompted to enter a new password that is different from the default password. Enter new password and select Next. c. Select Next. d. Select the Device User Interface Authentication option CAC/PIV and select Next. Note: This screen is dependent on the selection made on the previous screen. 16 Xerox Common Access Card Common Access Card Installation Guide Installation Select the Device User Interface Authentication option Configure. The Authentication Configuration screen displays. e. Enter the Smart Card Timeout required between 1 and 120 minutes. If the machine is inactive for the period of time specified, it will end the session automatically. Note: At the completion of configuration of CAC, you can return to this screen and Configure the Device Access permissions if desired. Please refer to the system administrator guides appropriate for your product. At the Domain Controller Certificate option select Add and browse to the Domain Controller Certificate. Note: If you are unable to obtain the required certificates, refer to Retrieving the Certificate from a Domain Controller or OCSP Server on page 33. Select the Certificate then select Upload Domain Controller Certificate. 18 Xerox Common Access Card Common Access Card Installation Guide Installation If the Domain Controller certificate is not available, the certificate that was used to issue the Domain Controller certificate can be uploaded instead. The Domain Controller certificate, or its issuing certificate is needed by the device to validate the interactions between the device and the domain controller. Repeat the process to enter the details for all Domain Controllers. If an error is made, select the Domain Controller from the list, and make any corrections. Note: To change the Domain Controller search order, select the controller and use the up and down arrows on the right side of the screen to promote or demote the controller order. Upload certificates Note: These steps are Read Only if using any of the OCSP Certificate Validation options. Load the DC root and intermediate certificates and the OCSP root and intermediate certificates: a. Select the Link to Security > Trusted Certificate Authorities Page option or select Trusted Certificate Authorities from the menu. At the Trusted Certificates Authorities screen, select Add. [. . . ] · Verify that Network Time Protocol is properly set up. · Verify that GMT offset is correct for your region, refer to Configure the date and time to update automatically on page 13. · Verify that GMT offset is correct for Daylight Savings Time. · Contact your System Administrator. [. . . ]