User manual XEROX WORKCENTRE 480CX

[. . . ] To go to a chapter in this book, click on one of the following links. After displaying a chapter, you can click on an entry in the chapter's Table of Contents, or click on the Search button to look for key words or phrases. To go to the printable copy of this User Guide, click on the Print Preview button on the left. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted. [. . . ] GreyScale - optimizes black and white printing and is used to print text. Media Type When you choose a media type, the Print Quality selection changes automatically to provide the best print quality. Click on the appropriate radio button to select the paper type for your document: Typical xerographic paper printing on High Resolution Ink Jet paper printing on glossy paper or film printing on transparencies printing a T-shirt Transfer printing on greeting card stock Dry Time Delay Check this box to activate a delay between the printing of pages to allow inks to dry. Faster print speed and reduced print quality Average print speed and good print quality If you need help with the printer driver, please note the version number before calling Xerox Technical Support. Note: If this tab is accessed through the Printers folder, any Changes made to settings will become the default settings for the printer. Settings made when the printer properties are accessed through an application File menu and Print or Print Setup will remain active until the application you are printing from is closed. The Advanced tab (shown on the next page) allows you to specify the halftone type and adjust the image brightness, contrast, saturation, and color strength. Halftone Halftone is an array in which dots are placed to simulate colors and shades of gray. Use the Halftone settings to improve the appearance of pictures and graphics. A Halftone is chosen automatically when you choose a document type from the Main tab. However, you can change the Halftone setting to customize your print job. You may need to experiment with different Halftone options to determine which setting is best for a particular picture or graphic. Simple line art and computer graphics graphic images with significant detail but limited shading graphic images photographic or highly detailed images Note: Air Brush Quality is only available with these Paper Types And Print Quality combinations: Coated paper with High print quality, and Glossy/Photo paper with High print quality. However, you can change these settings to produce special effects. To increase an Image setting, move the slider control to the right; to decrease a setting, move the slider control to the left. The image to the right of these controls gives an impression of the final result of your changes to the settings. The image may not appear exactly as you would expect if your color monitor does not support enough colors. Brightness Move the slider control to the right or left to increase or lessen the brightness of your document's image. Contrast Move the slider control to the right or left to increase or lessen the amount of contrast in your image. Move the slider control to the right or left to increase or lessen the amount of color saturation in your image. Color Strength Move the slider control to the right or left to increase or lessen the amounts of red, green, or blue in your image. However, the names of the tabs and some of the features are different. [. . . ] MENU, SYSTEM DATA, UP ARROW 7 TIMES (until ANSWER ON RINGS displays) Next, enter the number of times the telephone will ring before the WorkCentre answers the call (1 - 7), and press the STOP button. You're connecting the WorkCentre with the following: In this configuration, you probably want the answering machine to answer incoming calls, but have the WorkCentre take over if the incoming call is a fax. Plug one end of a telephone cable into the WorkCentre's Line connector, and the other end into the wall outlet. Plug the answering machine Line into the EXT connector, and plug the extension telephone into the answering machine. [. . . ]