User manual XEROX WORKCENTRE C226

[. . . ] Xerox WorkCentre C226 User Guide Warranty While every effort has been made to make this operation manual as accurate and helpful as possible, Xerox Corporation makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. Xerox is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws. Trademark information Microsoft Windows operating system is a registered trademark or trademark of the Microsoft Corporation in the U. S. A. [. . . ] Default setting: Selected On First Page Only Select this checkbox when you want to have a watermark printed on only the first page of a print job. Default setting: Not selected As Outline Only Select this checkbox when you want to print only the outline of the characters of a watermark. Default setting: Not selected This setting cannot be selected when setting is selected. 3-34 Xerox WorkCentre C226 User Guide Selecting Printing Functions Color settings When the Color tab is selected, the following screen appears. The settings and buttons in this screen are explained below. 1 2 3 Original Type This displays the currently selected document type and an explanation. When [Gray Scale] is selected in setting on page 3-37, this setting cannot be selected. Default setting: Standard (The selected settings are the default settings. ) The default settings for the document types are as follows: Color Rendering *1 Standard Graphics Original Type UCR Selection *2 Black Overprint*3 On On Pure Black Text*5 On Off Screening*4 Automatic Text/ Graphics Photo Xerox Color Standard Saturation Match Perceptual Match (Photo) Saturation Match Perceptual Match (Web) High Black Low Black High Black Standard Photo Drawing (Thin line) Web Page Custom Off Off On Automatic On Off On Automatic Automatic On On Xerox Color Standard *1 Colour Rendering Select colour matching settings. *2 UCR (Under Colour Removable) Selection Set the proportion of black toner to be used. Xerox WorkCentre C226 User Guide 3-35 Printer Operation *3 Black Overprint Select whether or not black characters are overprinted on a colour background. *5 Pure Black Text Select whether to print black characters with black toner, or with 4-colour CMYK toner. Custom Use these settings when you wish to change the default settings for each document type. Preview of document type This shows a preview of the document type selected in Table of document type previews Color Mode Color Gray Scale Automatic . Standard Graphics Photo Original Type Drawing (Thin line) Web Page Custom 3-36 Xerox WorkCentre C226 User Guide Selecting Printing Functions 4 5 6 Color Mode Select thecolour mode for printing. When Automatic is selected, a decision is made page by page. If colours other than black are used, colour printing takes place. If only black is used, black and white printing takes place. This is convenient when colour and black and white pages are mixed together, however, the print speed is slower. Default setting: Color The image of the page layout in the colour mode setting. on page 3-16 varies as follows depending on (Displayed on tabs other than the Watermarks and Color tabs. ) When set to [Automatic] When set to [Color] When set to [Gray Scale] Xerox WorkCentre C226 User Guide 3-37 Printer Operation Print Priority Select whether priority is given to speed or quality when printing. [Quality]*1 Select this when you want a high-quality image even if more time is required for printing. *1 This cannot be selected if only standard memory (128 MB) is installed. This can only be selected when the [Color Mode] ( above) is set to [Gray Scale]. [Speed] Select this when you wish to print quickly even if the image quality is inferior. Default setting: Speed All Text to Black When you wish to have all colour text printed in black, select this checkbox. Default setting: Not selected Image Use this item to adjust the brightness and contrast. [Brightness] This indicates the brightness of colours. [. . . ] Make sure the original is placed so that the correct side is scanned. Check with the operator of the other machine. "Checking the Size of a Loaded Original" on page 5-12 "Loading a Document" on page 5-11 _ The transmitted image prints out blank at the receiving side. Was the original placed so that the correct side is scanned?If the receiving machine is using thermal paper, was the thermal paper loaded with the wrong side out?Were line conditions poor due to thunder or another reason? [. . . ]