User manual XEROX WORKCENTRE PRO 575

[. . . ] XEROX WorkCentre Pro 555/575 User's Guide 708P84301 Xerox Limited, Global knowledge and Language Services, Enterprise Centre, Bessemer Road, WELWYN GARDEN CITY, AL7 1HL United Kingdom ©2000 by Xerox Corporation. Xerox®, Xerox Limited® and all the products mentioned in this publication are trademarks of Xerox Corporation and Xerox Limited. Products and trademarks of other companies are also acknowledged. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks, etc. [. . . ] Fine Use for documents with small characters (newspaper print, etc. ). Use for documents containing very detailed print. Use for documents containing photographic images. Superfine Photo If you choose a resolution and the receiving machine does not have an equivalent, the WorkCentre chooses the next highest resolution compatible with the remote machine. If you do not know the remote machines resolution capability, it is recommended that you use the Direct Send mode when Superfine Photo is selected. In Direct Send mode, the WorkCentre determines the receive resolution prior to scanning the document. The document is then scanned at the compatible receiver resolution resulting in better print quality. WorkCentre Pro 555, 575 3-19 Getting Started Selecting the Scan Contrast To select the Scan Contrast: Press the Contrast key until the required contrast mode is indicated by a Contrast LED Note: When a Contrast LED is not illuminated, the Contrast setting is Normal. The Contrast setting adjusts the print darkness of the copy or transmitted document. The default contrast setting is normal on base machine. The machine returns to the default setting after each transmission. Refer to the System Administrator's Guide for details about changing the default setting for contrast. Contrast selection Normal Description For documents printed with ordinary image density. For documents with dark print that need to be adjusted to print lighter. For documents with light or faint print that need to be adjusted to print darker. Lighten Darken 3-20 WorkCentre Pro 555, 575 Getting Started Quick Start To Receive The default answer mode is Auto answer. When the remote party calls to send you a document, your WorkCentre automatically receives and prints the document. To Send 1. Load a document face down in the Document Tray. Using the Numeric Keypad, enter the telephone number of the remote fax. Load a document face down in the Document Tray. Install the print drivers supplied with your WorkCentre following the instructions on the CD. To print from your application select Print from you File menu. Select the printer name you have given to the WorkCentre print queue. Select any printing options you require. Select OK to send you documents to the WorkCentre For further information about all the features of the WorkCentre please refer to the Advanced Features Guide. WorkCentre Pro 555, 575 3-21 Getting Started Phonebook Reports Individual phonebook reports can be printed for Alphabet, Speed Dial, One Touch and Group stored in the WorkCentre. You can also print all four of the Phonebook Reports in a single operation. Note: Refer to the individual report printing procedures for the report contents tables. To print all four Phonebook Reports: 1. Press: Phonebook Report Phonebook 1. [. . . ] However, if action is reasonable and necessary, but prior notice is not practical, they may still temporarily disconnect your service. In such cases they must: Immediately notify you of their temporary action. Reconnect service when the source of damage is removed. Inform you of your rights to bring a complaint to the FCC under FCC rules. [. . . ]