User manual XEROX WORKCENTRE XI70C

[. . . ] Xi70c User Guide 701P99508 4/99 FCC Compliance in the USA WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Press START. 35 Using your WorkCentre as a Copier (continued) Customizing your copy output You can customize your copy output directly from the Control Panel or by changing the Default Settings in the Copy Features menu as explained later in this section. Using the Control Panel Selections made directly from the control panel are not memorized and will be lost if you press the Clear button twice, after the time-out set in the Default menu (Auto Clear Time) or when you switch off your WorkCentre. C 1 2 3 4 5 1. Copy Quality This feature allows you to select BEST, NORMAL or DRAFT copy quality, according to the type of output you require (Shown by lights). DRAFT is possible ONLY if you have selected PLAIN paper. Copy Intensity This feature enables you to lighten or darken black & white, and saturate or soften color on the copies you make. Reduction/Enlargement Preset Using the FIXED SCALE button, you can select one of the six values indicated above the button on the control panel (Shown by lights). 100% one to one copying (default value) 36 Using your WorkCentre as a Copier (continued) Auto automatic adjustment of the original to a full page on the output copy, with allowance for default margins. (LCD shows 93% for LETTER, 94% for A4) Customer zoom R/E/ Poster/ Clone function 100% Default setting, can be changed. Poster Enlarges the original and divides up the output of your original into a number of sections (maximum: 400%, 5 x 5 format, yielding 25 sheets - default setting). Use this feature to create different size posters from standard page-size originals. Clone: Fits on the currently selected paper size as many images of the original as the paper size will hold. (maximum: 100%, yielding 1 per page - default setting). You can use this feature to reproduce your business card, invitations, standard size photographs, etc. For Poster/ Clone do the following: Select quantity of output, press START Press zoom R/E to select desired output, then press start Reduction / Enlargement 8. 5>5. 5 or A4>A5 reduction (LCD shows 78% for LETTER, 70% for A4) 5. 5>8. 5 or A5>A4 enlargement (LCD shows 129 % for LETTER, 141% for A4) 400% Max enlargement (LCD shows 400%) 4. Variable You can select the reduction/enlargement percentage you require, using the UP/DOWN ARROW 25%/400% button (the LCD will show the percentage selected). Color or Black/White copies Using this button you can select color or black and white copying (Shown by lights). The default values for the individual features will be restored as soon as the WorkCentre control panel shows READY or when you switch the WorkCentre on again. 37 Using your WorkCentre as a Copier (continued) Using the Copy Features menu C 1 2 3 4 5 6 The Copy Features menu contains a number of parameters that you may wish to customize for your standard output. Once you have selected and confirmed the settings you require, these can be memorized as default values and will be restored whenever you switch on or restart your WorkCentre. How to access With the WorkCentre in stand-by (READY TO COPY. . . . . 100%. . . . . 1), press the Copy Features button (4) on the control panel. The LCD will show PAPER TYPE: PLAIN (default value) or the last value selected and saved as the default. How to navigate within the Copy Features menu · To select another PAPER TYPE, press the navigation button > (2) on the control panel to display the next choice in the menu (PHOTO ON PLAIN). Pressing the navigation button < will move you back to the previous choice. [. . . ] If you have a problem with your unit The answers to many problems may be found in the documentation provided with your unit (check the Troubleshooting section). Other sources for help include: (1) Xerox' website http://www. teamxrx. com; (2) "fax back" service for answers to commonly asked questions -- available via 1-800-TEAM-XRX (1-800-832-6979) 24 hours a day, 7 days a week; (3) our trained, Customer Support Representatives at 1-800-832-6979 available 8 a. m. Before you call, please be ready to provide the serial number, date of purchase and a description of the problem. Our replacement program is the easiest and quickest way to provide you with a fully operational unit. [. . . ]