User manual XEROX WORKCENTRE XK50CX

[. . . ] Xerox Corporation 1350 Jefferson Road Rochester, NY 14625 United States of America ©2000 by Xerox Corporation®, The Document Company ®, the stylized X, WorkCentre, and the identifying product names and numbers herein are trademarks of Xerox Corporation. Copyright protection claimed includes all forms and matters of copyrightable materiasl and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display tools, etc. Product names used in this guide may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All nonXerox brands and product names are trademarks or registered trademarks of their respective companies. [. . . ] Printing with a paper that is thick enough to come in contact with the print head nozzles may damage the cartridge. When you make a copy you can use the Control Panel buttons to change these settings. Feed the document to be copied face up into the Automatic Document Feeder using light forward pressure until DOCUMENT READY appears in the LCD display. Or Place a single document on the flatbed scanner face down with the edges aligned to the green guides on the scanner. Adjust any settings as desired using the buttons on the Control Panel. Enter the number of copies you would like to make using the number keypad. Special Copy Features You can set the following special features by pressing Reduce/Enlarge Control Panel: · This prints multiple image copies on a single page. This automatically reduces or enlarges the original image to fit on the paper. Left or Right to set the percent from 25% to 400%. After making one of these special copy feature selections, you can begin copying. For example 2 copies of a 3 page job will print one complete document followed by the second complete document. Printing You can use the XK50cx with all Windows programs. Be sure to set the XK50cx as the default printer for all your Windows 95/98, Windows 2000, or Windows NT 4. Most Windows software programs allow you to make changes to the printer settings. This includes settings that determine how a print job looks, such as page size, paper orientation (landscape or portrait), and margins. The following steps describe the typical process to print from a Windows environment: Make sure the XK50cx is properly connected to your computer, and that you have installed the XK50cx software. Note: Printer Properties dialog box buttons and options include: OK: click when you have finished making changes. Cancel: click if you want to exit without making any changes. Help: click to view online help about printer settings. From your Windows software program, choose Print or Print Setup from the File menu. make sure the WorkCentre XK50cx is the selected printer. Click on the Properties or Setup button if you want to make any adjustments that are appropriate for printing your document. [. . . ] Dial the number manually with the number keypad. Program the number to a Speed Dial location and try again. If the machine runs out of paper, it will restart printing when more paper is loaded. The Speed Dial location you tried to use has no number assigned to it. [. . . ]