Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual XTA GQ600. We hope that this XTA GQ600 user guide will be useful to you.
Lastmanuals help download the user guide XTA GQ600.
Detailed instructions for use are in the User's Guide.
[. . . ] No user serviceable parts inside - refer all servicing to qualified personnel. The mains power cord is fitted with a safety earth (ground) connection. Do not operate this unit with this connection removed.
Unpacking the GQ600
After unpacking the unit please check carefully for damage. If damage is found, please notify the carrier concerned at once. [. . . ] Power LED - indicates unit is powered on.
2. Fixing Holes - for security cover.
GQ600 Page 5
Rear Panel Functions
1.
Mains Power - is connected via a standard IEC socket. A compatible power cord is supplied with the unit. Mains Fuse - is located in a finger-proof fuseholder adjacent to the mains inlet. Always replace this fuse with the correct type as shown on the rear panel legend. Power Switch - a double pole rocker switch isolates both live and neutral connections. Voltage Selector - switches between two nominal operating voltages. Please ensure this is set for the correct voltage before operating the unit. Disconnect power to the unit before resetting this selector. XLR Inputs and Outputs - separate 3 pin XLR connectors are provided for each audio input and output. All terminations are fully balanced where pin 2 = Hot, pin 3 = Cold and pin 1 = Screen (shield). See page 8 "Grounding" for more information. Klippon Inputs and Outputs - a six pin Klippon socket is also provided for each channel. The corresponding plug features screw terminals allowing quick termination of system wiring, giving the advantages of barrier strip plus the bonus of easier servicing and the ability to pre-wire. Each connector carries input and output connections with all terminations fully balanced, where H = Hot, C = Cold, S = Screen (shield). Safety Ground Screw - Do Not Remove.
2.
3. 4.
5.
6.
7.
GQ600 Page 6
Specifications
Inputs Impedance CMRR Outputs Source Imp. Level Gain Two, electronically balanced. ± 10dB via rotary control.
Frequency Response± 0. 5dB 20Hz - 20kHz with controls "flat". Equivalent Input Noise Distortion @ +18dBm Peak Indicator H. F. Trim In/Out High-pass Filter Filter Type Frequency Low-pass Filter Filter Type LPF In/Out Equaliser Section Filters Filter Type Freq. Tolerance Range Connectors Inputs Outputs Input/Output Power Power Consumption Weight Size < -98dBm (20-20kHz unweighted) with controls '"flat". [. . . ] The chassis is also directly connected to this pin. Never operate this unit without the mains safety ground connected. Signal ground (0V) is in turn connected to the chassis ground via a 10R resistor.
GQ600 Page 8
To avoid ground loops, cable shields should be connected to ground at one end only. The normal convention is that the shield is only connected at the output XLR. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE XTA GQ600
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual XTA GQ600 will begin.
