User manual XTANT RM

[. . . ] INSTALLING AN RM MODULE STEP 1: Locating the Connectors A. Remove the RM Module from the packaging and inspect the circuit board. [. . . ] If further adjustment is necessary, turn amp off and exchange the RM Module for a higher or lower value. Warning, the RM Modules will become HOT during normal use. To avoid burns, caution should be taken when exchanging an RM Module. RM MODULE BOARD CONNECTORS mentation will help you determine the best value. illustration 1 RM MODULES Designed for use with the A Series Amplifiers Increase Tuning Options and Staging Speaker Level Attenuation: Via Resistors Number of Resistors: 2 per module Levels of Attenuation: FOUR - YEAR LIMITED U. S. A. WARRANTY This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Xtant Technologies (Xtant) warrants its amplifiers and accessories to be free from defects in materials and workmanship under normal use and service for a period of four (4) years from the date of original purchase when the unit is installed by an Authorized Xtant Select Dealer. Non-Authorized Dealer installed products carry a one (1) year parts and labor limited warranty. The extent and conditions of Xtant's Limited Warranty are as follows: 1. Authorized Xtant Select Dealer Installed Products: Xtant will either repair or replace at no charge, to the original purchaser, any unit which Xtant's examination discloses to be defective and under warranty, provided the defect occurs within four (4) years from the date of purchase when the unit is installed by an Authorized Xtant Select Dealer and the product is returned immediately to Xtant. Non-Authorized Xtant Dealer Installed Products: Xtant will either repair or replace at no charge, to the original purchaser, any unit which Xtant's examination discloses to be defective and under warranty, provided the defect occurs within one (1) year from the date of purchase and the product is returned immediately to Xtant. The date of purchase and proof of Authorized Dealer Installation of an Xtant amplifier and/or accessory must be established by an original (or copy of the original) sales receipt which must accompany the article being returned for warranty work. [. . . ] If an Authorized Xtant Select Dealer is not available, please contact Xtant's Customer Relations Department at (602) 970 9900 from 8:00 am to 5:00 pm (MST) for assistance. RM 4 RM 8 RM 12 RM 16 = 4 dB = 8 dB = 12 dB = 16 dB Inserting an RM module onto its associated port activates the "passive speaker terminals"located on the 302a and 403a amplifiers. The RM 4, RM 8, RM 12 & RM 16 resistor modules are designed to provide four different levels of speaker attenuation. Xtant Technologies · 7676 South 46th Street · Phoenix, Arizona 85040 [. . . ]