User manual XTATIX SHOOTER INSTRUCTION MANUAL

[. . . ] Please do not operate player without following proper instructions. Shooter Diagram LCD Display -2- General Functions To Turn Player On: Make sure the POWER switch is positioned in the on position. The on position is obtained when the POWER switch is slid fully in its track towards the " MODE " toggle/button. [. . . ] Then when the desired choice is shown in the display, push in the " MODE " toggle/button to select the mode. 4. 3 Under Contrast mode Use the " / " toggle to adjust the brightness display. To confirm selection and return to upper menu press in the " MODE " toggle/button. -4- 4. 4 Under Backlight setting This function allows you to set the time of the background light from 00 to 60 seconds. Use the " / " toggle to change the time. To confirm selection and return to upper menu press in the " MODE " toggle/button. 4. 5 Power off setting This option allows the user to set the duration of time after which the player will automatically turn its self off if left idle. The following choices are provided: disabled, 1 minute, 2 minutes, 5 minutes and 10 minutes. Disabled: Under stop status, the player will stay at stop status without automatic turning off unless the Turn off button is pressed. x minutes: Under stop status, if there is no other button pressed, the player will be automatically powered off after x minutes, the player will turn itself off to conserve power. Use the " / " toggle to change the time. To confirm selection and return to upper menu press in the " MODE " toggle/button. 4. 6 Under Record setting Use the " / " toggle to select the options, then press in the " MODE " toggle/button to confirm and set the selected option. Select Exit option and press " MODE " toggle/button in to return to upper menu. The record settings are as follows (the higher the rate the more memory is used, the lower the rate the longer the recording): Source MIC MS Encoder ADPCM Channels MONO Device Internal 32000HZ 48000HZ Rate 11025HZ 22050HZ Exit PCM IN ADPCM 44100HZ 8000HZ 16000HZ -5- 4. 7 Language Change languages shown on the player. About From the main menu you can enter the "About" screen which shows information about player memory and components. Features A-B Repeat The A-B feature allows the listener to select a specific portion of the audio to repeat. Under file playing (music or voice) status, press "A-B Repeat/REC" button and A- will appear at the top left corner of the LCD. Press the "A-B Repeat/REC" button again to signal when to end the portion of audio which will be repeated. Look for A-B to appear in the top left corner of the LCD screen. [. . . ] (7) To stop recording press in the "MODE" button. To pause recording press the "PLAY" button. USB connection 1. Connect the USB port of the player to the computer through USB plug or data cable. [. . . ]