User manual YAESU FT-1802M

[. . . ] FM TRANSCEIVER FT-1802M OPERATING MANUAL VERTEX STANDARD CO. , LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U. S. A. YAESU EUROPE B. V. P. O. Box 75525, 1118 ZN Schiphol, The Netherlands YAESU UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U. K. VERTEX STANDARD HK LTD. Unit 5, 20/F. , Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessories & Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] While operating in the Memory Bank mode, recall the memory channel to be removed from a Memory Bank. Press and hold in the [D/MR(MW)] key for one second, then press the [A/N(LOW)] key to remove the memory channel data from the Memory Bank. You must first enter the Memory Bank mode, by pressing the microphone's [ key, before attempting to remove a channel from a Bank. If you don't, "MCHERR" will appear when you press the [A/N(LOW)] key in step (2) above. ] Changing a Memory Bank's Name You may change the default Memory Bank Name, which is indicated on the display when you've selected a Memory Bank, to a different name, if desired. Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to select "9 BNK NM. " 2. Press the [MHz(SET)] key momentarily, then rotate the DIAL knob to recall the memory bank on which you wish to change a label. Press the [A/N(LOW)] key to enable changing of the name tag. Rotate the DIAL knob to select the first digit of the desired label. Press the [A/N(LOW)] key to move to the next character. If you make a mistake, press the [REV(DW)] key to back-space the cursor, then re-enter the correct letter, number, or symbol. Repeat steps 4 through 6 to program the remaining letters, numbers, or symbols of the desired label. A total of six characters may be used in the creation of a label. When you have programmed a name which is under 6 characters, press and hold in the [MHz(SET)] key for one second to confirm the label and exit to normal operation. FT-1802M OPERATING MANUAL 39 MEMORY OPERATION HOME CHANNEL MEMORY A convenient one-touch "Home" channel memory is available to simplify return to your most-often-used frequency. This memory does not appear in the regular memory bank, to simplify operation and speed recall of this important channel. To recall the Home channel, just press the [D/MR(MW)] key, repeatedly if necessary, until the "HM" icon appears on the display; this indicates that the Home USA version EXP version Channel has been recalled. The factory default frequency for the Home channel is 146. 520 MHz (USA version, EXP version: 144. 000 MHz). You can re-program the Home channel in a manner identical to that used for the regular memories: 1. From the VFO mode, tune in the frequency you wish to store, and set all repeater shifts and other data just the way you do for "normal" memory channel storage. Press and hold in the [D/MR(MW)] key for one second, then press the [REV(DW)] key to store the displayed data into the Home channel. The memory label will disappear (since you are still operating in the VFO mode). You may also append an alpha-numeric "Tag" (label) to a Home channel, as described previously. [. . . ] T DCS: Encodes a CTCSS tone and Decodes a DCS code. D TONE: Encodes a DCS code and Decodes a CTCSS tone. 49 SQL. TYP Function: Selects the Tone Encoder and/or Decoder mode. Available Values: TONE / TSQL / DCS / RV TN / OFF Default: OFF TONE: CTCSS Encoder TSQL: CTCSS Encoder/Decoder DCS: Digital Coded Encoder/Decoder RV TN: Reverse CTCSS Decoder (Mutes receiver when matching tone is received) Note: See also Set Mode Item "48 SPLIT" regarding additional selections available during "Split Tone" operation. [. . . ]