User manual YAESU FTM-350RE SOFTWARE UPDATE PROCEDURE 7110

[. . . ] 4 Rear Panel & LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessories & Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press and hold the The blinking "CLB" notation returns to the blinking "SET" notation. Press the [VOL/SEL] key to save the new setting and exit to normal operation. 52 FTM-350REOPERATING MANUAL CLOCK/TIMER OPERATION The FTM-350REhas a 24-hour clock (accuracy: ±30 sec/month). With the Clock/Timer, you may operate the following features: Clock feature: Display the current time. Stop Watch Timer feature. SET UP THE CLOCK Press and hold the [VOL/SEL] key for one second to activate the Menu mode. Rotate the DIAL knob to select Menu Item "F9 CLOCK". Press the key to enable selection of this Menu Item. Rotate the DIAL knob to select "ON". Press the [VOL/SEL] key to save the new setting and exit to normal operation. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer. Rotate the DIAL knob to select the Clock. When the Clock is displayed in above step, this step is unnecessary 8. This accuracy depends on the temperature fluctuations in the place where the radio is used. The clock has a back-up Lithium battery, and will function for around 2 months after disconnecting the power supply cable. 54 FTM-350REOPERATING MANUAL CLOCK/TIMER OPERATION USING THE STOP WATCH TIMER The Stop Watch provides several timing functions for your convenience at motor sports and rallies. To operate the Stop Watch Timer, first activate a Clock function via the Menu mode "F9 CLOCK". Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer. Rotate the DIAL knob to display the Stop Watch Timer. This step is not necessary if the Stop Watch Timer is displayed in the above step. The Stop Watch Timer is designed to Start and Stop repeatedly whenever you press the key. The LED at the left of the DIAL knob blinks yellow while the Stop Watch Timer is counting. Press and hold the key for one second to reset the Stop Watch Timer. USING THE INTERVAL TIMER The Interval timer is similar to the Stop Watch Timer. It is synchronized with the Stop Watch Timer. To operate the Interval Timer, First activate a Clock function via the Menu mode "F9 CLOCK". [. . . ] Set up the Bluetooth® device which is connected to the front panel of the transceiver. Once you have made your selection in step 3, press the PTT key and confirm that (YES) is displayed on the LCD. Press the PTT key once more to complete the reset procedure. (To cancel the reset procedure, turn the transceiver off before pressing the PTT key. ) FTM-350REOPERATING MANUAL 107 TROUBLESHOOTING The LED at the left side of the DIAL knob Blinks in Yellow The Volume Setting Alert feature is turned on. [. . . ]