User manual YAESU PCC-2000

[. . . ] PCC-2000 REFERENCE BOOK PCC-2000 REFERENCE BOOK The PCC-2000 allows you to quickly and easily operate the Yaesu FT-2000/D HF/50 MHz Transceiver from your personal computer. IMPORTANT NOTE By using this software, you acknowledge that the Software is not intended for use in connection with any high risk of personal injury or strict liability activity (including, without limitation to, air travel, space travel, fire fighting, police operations, power plant operation, military operations, rescue operations, hospital and medical operations) and that Vertex Standard makes no warranty and shall have no liability in connection with any use of the Software in such situations. All title and copyrights in and to the Software (including but not limited to any data, images, text, and other components), and the accompanying printed materials, are owned by Vertex Standard. The Software is protected by copyright laws and international treaty provisions, including U. S. Vertex Standard and YAESU are trademarks of Vertex Standard. [. . . ] Click the left mouse button on the [CONT] button to open the "Contour/APF" pop-up window, then select the configuration you wish to use. OFF: Turns the Contour filter/APF both off. The Contour filter characteristic will appear in the display APF: Turns the APF (Audio Peak Filter) filter on. The APF is activated only with a CW mode. The "CONTOUR" indication on the display will change to "APF". When the Contour filter is set to on, click the left mouse button on the edge of the [CONTOUR] knob (the indication color of "CONTOUR" will turn yellow), then turn the mouse scroll or press the left/right buttons to adjust the center frequency of the Contour filter (There is no adjustmet knob associated with the APF). [CONT] button [CONTOUR] knob "Contour/APF" window -9- PCC-2000 REFERENCE BOOK IF SHIFT OPERATION Click the left mouse button on the edge of the [SHIFT] knob (the indication color of "SHIFT" will turn yellow), then turn the mouse scroll or press the left/right buttons to move the filter passband. [SHIFT] knob WIDTH OPERATION Click the left mouse button on the edge of the [WIDTH] knob (the indication color of "WIDTH" will turn yellow), then turn the mouse scroll or press the left/right buttons to adjust the filter bandwidth. Click the left mouse button on the [NOTCH] button to turn the Notch filter on and off. When the Notch filter is set to on, the Notch characteristic will appear in the display. Click the left mouse button on the edge of the [COARSE] knob (the indication color of "COARSE" will turn yellow), then turn the mouse scroll or press the left/right buttons to perform coarse adjustment of the center frequency of the IF Notch filter. Click the left mouse button on the edge of the [FINE] knob (the indication color of "FINE" will turn yellow), then turn the mouse scroll or press the left/right buttons to make fine adjustments to the center frequency of the IF Notch filter. NOTCH [FINE] knob [NOTCH] button NOTCH [COARSE] knob AUTO NOTCH OPERATION Click the left mouse button on the [DNF] button to turn the Auto Notch filter on and off. When the Auto Notch filter is set to on, the "DNF" icon will appear in the display. [DNF] button NOISE REDUCTION OPERATION 1. Click the left mouse button on the [DNR] button to turn the Digital Noise Reduction system on and off. When the Digital Noise Reduction system is set to on, the "DNR" icon will appear in the display. Click the left mouse button on the edge of the [DNR] knob (the font color of "DNR" will change to yellow), then turn the mouse scroll or press the left/right buttons to select the setting that most effectively reduces the noise level. [DNR] button - 10 - PCC-2000 REFERENCE BOOK NAR (ONE-TOUCH NARROW IF FILTER SELECTION) MAIN BAND (VFO-A) 1. Click the left mouse button on the [NAR] button to engage the preset "Narrow" IF filter selection. When the narrow bandwidth is engaged, the "NAR" indication will appear in the display. Click the left mouse button on the [NAR] button again; the bandwidth will revert to that set by the [WIDTH] knob. [. . . ] Enter the CAT command you wish send to the FT-2000 with the PC keyboard. For example: Set the VFO-A frequency to 14. 250000 MHz. FA14250000; Refer to a "FT-2000 CAT Operation Reference Book" for the CAT command. Click the [OK] button to send the CAT command to the transceiver and close the pop-up window. "COMMAND SEND" parameter "Command Send" window [OK] button - 23 - PCC-2000 REFERENCE BOOK FUNCTION KEY OPERATION You can program and assign the CAT commands into your computer's Function keys using the Vertex Standard KSE4PCC Keyboard Shortcut Editor, then you may control the transceiver by pressing your computer's Function keys while activating the "PCC-2000" Personal Computer Controller. [. . . ]