User manual YAESU SM-5000 APRS MANUAL

[. . . ] NOTE: 1) Requires FTDX5000 Menu item "108 ROUT HEADPHN" be set to "SEPARATE". 2) When receiving only VFO-A or VFO-B, the audio is routed to both speakers, regardless of the switch position. Display This LCD Monitor displays the Spectrum Scope of VFOA band activity. [CONTRAST]([+] / [­]) Switch These switches adjust the Contrast level of the SM-5000 display. Press the [CONTRAST(+)] switch to increase the contrast. Press the [CONTRAST(­)] switch to reduce the contrast. [. . . ] As the sweep segment becomes narrower, the speed becomes faster, and the accuracy and resolution are enhanced. The bandwidth can be set to 50 %, 30 %, or 10 % of the full span. The sweep speed will increase as follows: 50 %: about 2 times faster, 30 %: about 3 times faster, 10 %: about 10 times faster. Press and hold the FTDX5000 [C. S] key for 2 seconds to engage the Scope Menu mode. The SUB DISPLAY-I window will show the Group name (SCOPE while the SUB DISPLAY-II window will show SCOPE), SCOPE the Menu item. The SUB DISPLAY-III window shows the setting of the currently-selected Menu item. Rotate the (VFO-A)[SELECT] knob to select the Menu item "MODE then rotate the (VFO-B)[SELECT] knob MODE", MODE to select the desired sweep bandwidth. LBWS-1: LBWS-1 The sweep speed becomes about 2 times faster (The bandwidth decreases to 50 %). LBWS-2: LBWS-2 The sweep speed becomes about 3 times faster (The bandwidth decreases to 30 %). LBWS-3: LBWS-3 The sweep speed becomes about 10 times faster (The bandwidth decreases to 10 %). Note: The "CENTER and "FIX selections are not select CENTER" FIX" CENTER FIX items of the LBWS function. Rotate the (VFO-A)[SELECT] knob to select the Menu item "SPAN then rotate the (VFO-B)[SELECT] knob SPAN", SPAN to select the desired frequency span to monitor. Available selections are: 25 kHz 50 kHz 100 kHz 250 kHz, kHz, kHz, kHz, kHz, kHz, kHz. Rotate the (VFO-A)[SELECT] knob to select the Menu item "ATT then rotate the (VFO-B)[SELECT] knob to select ATT", ATT the display attenuation value according to current propagation conditions, your operating frequency, and antenna, etc. Available selections are: 0 dB 10 dB and 20 dB dB, dB, dB. Press the [C. S] key briefly to save the new setting and exit to normal operation. NOTE: The Trace Mode cannot be selected with the LBWS function. [C. S] Switch (VFO-A)[SELECT] Knob (VFO-B)[SELECT] Knob Current VFO-A Frequency OPERATING Mode LBWS Current Sweep Bandwidth SELECTING THE SWEEP AREA 1. Press and hold the FTDX5000 [C. S] key for 2 seconds to to engage the Scope Menu mode. The SUB DISPLAY-I window will show the Group name (SCOPE while the SUB DISPLAY-II window SCOPE), SCOPE will show the Menu item. The SUB DISPLAY-III window shows the setting of the currently-selected Menu item. Rotate the (VFO-A)[SELECT] knob to select the LBWS", Menu item "LBWS then rotate the ( VFOLBWS B)[SELECT] knob to select the desired sweep area. Available selections are shown at the right. [. . . ] 1 V-AF Cable (T9101592) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 DC POWER Cable (T9101593) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Side Plate-L (RA1227300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Side Plate-R (RA1227400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]