User manual YAESU VR-120D

[. . . ] COMMUNICATIONS RECEIVER VR-120D OPERATING MANUAL VERTEX STANDARD CO. , LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 17210 Edwards Rd. , Cerritos, CA 90703, U. S. A. 52nd Terrace, Suite 201, Miami, FL 33166, U. S. A. YAESU EUROPE B. V. P. O. Box 75525, 1118 ZN Schiphol, The Netherlands YAESU UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U. K. VERTEX STANDARD HK LTD. Unit 5, 20/F. , Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VR-120D OPERATING MANUAL 1 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls & Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Rotate the DIAL knob to select the "O" character. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to move on to the next digit. Rotate the DIAL knob to select the "A" character. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to move on to the next digit. Rotate the DIAL knob to select the "4" character. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to move on to the next digit. Rotate the DIAL knob to select the "5" character. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to move on to the next digit. Rotate the DIAL knob to select the "0" character. Press the [V/M] key while pressing the [FUNC] key to save the alpha-numeric information. Now, press the [V/M] key once more while still holding in the [FUNC] key. This stores the frequency into the memory. "WRITE" will appear of the display, to confirm that the frequency data was successfully stored. You still are operating in the VFO mode, and you may store other channel frequencies into other memory channel registers in the same manner. To recall these memories, proceed to the next section. VR-120D OPERATING MANUAL 21 Memory Mode MEMORY RECALL Recall of memorized channels is very simple: 1. Press the [V/M] key to enter the Memory mode. The memory number will appear in the top left-hand corner of the display, indicating that you are now operating in the Memory Recall mode. Rotate the DIAL knob to select the desired memory channel. Rotate the DIAL knob, while pressing the [FUNC] key, to recall the first memory channel of each memory bank. To return to the VFO mode from the Memory mode, just press the [V/M] key. LABELING MEMORIES You may wish to append an alpha-numeric "Tag" (label) to a memory or memories, to aid in recollection of the channel frequency's significance (such as a Broadcast Station name, etc. ). Alpha-numeric labels may be appended at the time of storage of the frequency data, or at a later time. In either case, the storage process is basically identical. [. . . ] Regrettably, no cash prizes are available in this mode!If you wish to play again, press the [BNDs] key. VR-120D OPERATING MANUAL 39 Cloning The VR-120D includes a convenient "Clone" feature, which allows the memory and configuration data from one radio to be transferred to another VR-120D. Here is the procedure for Cloning one radio's data to another: 1. Connect the optional CT-35 cloning cable between the SP jacks of the two radios. [. . . ]