User manual YAMAHA 01V96

[. . . ] Owner's Manual Keep This Manual For Future Reference. E FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. [. . . ] If the selected memory's channel type does not match the type of the destination channel, an alarm mark ( ) and the word "CONFLICT" appear next to the STORED FROM parameter. These alarms indicate that you tried to recall unrecallable channel settings to the currently-selected channel. 16 Libraries 01V96--Owner's Manual 174 Chapter 16--Libraries The alarm indicators also appear when the Surround mode, Aux pair, and other non-channel parameter settings originally stored in the memory do not match those for the destination channel. However, if the channel type of the memory and that of the destination channel match, you can recall the settings even with the alarm indicators displayed. (For unmatched parameter settings, the 01V96 will use the settings in the memory that is to be recalled. ) The following preset memories are available for the Channel library. No. 0 1 Preset Name Reset (­ dB) Reset (0 dB) Description This preset memory resets all parameters of the currently-selected channel to their initial values and sets the channel fader level to (­ dB). This preset memory resets all parameters of the currently-selected channel to their initial values and sets the channel fader level to 0 dB (i. e. , nominal). Input Patch Library The Input Patch library enables you to store and recall all Input Patch settings. The library contains one preset memory and 32 user (readable & writable) memories. To access the Input Patch library, press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | IN LIB page appears. For details on storing and recalling memories, see "General Library Operation" on page 171. Input Patch preset memory #0 contains the following settings: Input Channels 1­16 Input Channels 17­24 Input Channels 25­32 ST IN Channels 1­4 INPUT connectors 1­16 ADAT IN Channels 1­8 Slot Channels 1­8 Internal Effects Processor 1­4 Outputs 1 & 2 01V96--Owner's Manual Using Libraries 175 Output Patch Library The Output Patch library enables you to store and recall all Output Patch settings. The library contains one preset memory and 32 user (readable & writable) memories. To access the Output Patch library, press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | Out LIB page appears. For details on storing and recalling memories, see "General Library Operation" on page 171. The Output Patch preset memory #0 contains the following settings: Slot output channels 1­8 Slot output channels 9­16 ADAT OUT channels 1­8 OMNI OUT connectors 1­4 Bus Outs 1­8 Bus Outs 1­8 Bus Outs 1­8 Aux Outs 1­4 Effects Library The Effects library enables you to store and recall Effects processor 1­4 programs. The library contains 44 preset programs and 84 user (readable & writable) programs. Note: The Effects library is shared by Effects processors 1­4. However, only Effects processors 1 and 2 enable the recall of Effect 19 "HQ Pitch" and Effect 42 "Freeze. " To store and recall settings to and from the library, you must locate the corresponding Effects processor's page. To access the Effects library, press the DISPLAY ACCESS [EFFECT] button repeatedly until the library page for the desired Effects processor appears. Each Effects processor features the library pages listed below: · Internal Effects Processor 1 Library. . . . . . . . . . . . FX1 Lib page · Internal Effects Processor 2 Library. . . . . . . . . . . . FX2 Lib page · Internal Effects Processor 3 Library. . . . . . . . . . . . FX3 Lib page · Internal Effects Processor 4 Library. . . . . . . . . . . . FX4 Lib page 16 Libraries 01V96--Owner's Manual 176 Chapter 16--Libraries 1 2 3 4 5 A EFFECT NAME This parameter displays the name of the Effects program currently selected by the Effects processor. B TYPE This parameter displays the effects type currently used by the Effects processor. The number of input and output channels for the currently-used effects appears below the TYPE parameter. C Move the cursor to this button, then press [ENTER] to display the Effect | FX1 Edit, FX2 Edit, FX3 Edit, or FX4 Edit page to adjust the Effects parameters. D Move the cursor to this button, then press [ENTER] to display the In Patch | Effect page to assign the input and output signals of Effects processors 1­4. E Level meters These meters indicate the input or output levels of the currently-selected Effects processor. Select the IN button or OUT button to display the input levels or output levels respectively. For details on storing and recalling programs, see "General Library Operation" on page 171. 01V96--Owner's Manual Using Libraries 177 The following tables list the preset effects programs in the Effects library: · Reverbs No. 1 2 3 4 5 6 7 Preset Name Reverb Hall Reverb Room Reverb Stage Reverb Plate Early Ref. Gate Reverb Reverse Gate Type REVERB HALL REVERB ROOM REVERB STAGE REVERB PLATE EARLY REF. [. . . ] Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 INDONESIA PT. [. . . ]