User manual YAMAHA 7000

[. . . ] Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] · Select "All" to set this unit to repeat a sequence of songs. y When "Repeat" is set to a setting other than "Off ", " " or " " appears in the top right corner while one song or a sequence of songs are being repeated. 1 All The function of the play information display [1] [2] [3] 1 Press 4 V-AUX/DOCK and then O DISPLAY. The following display appears in the OSD. iPod Playlists Artists Albums Songs Genres Composers Settings Top > > > > > > > iPod 1/9 [Play] Frankie Zipper Made-to-order Road to India All [7] [8] [4] [5] [6] [9] ||;;;;;;;;;;;;;;;;;; 0:51 -7:44 Playback status Track number/total tracks Artist name Song title Progress bar Elapsed time Shuffle and repeat icons (playback), forward) and (pausing), (search (search backward) [10] 2 Press 8 k / n / l / h to navigate the iPod menu and then press 8 ENTER to begin playback of the selected song. Choices: Playlists (playlists), Artists (artists), Albums (albums), Songs (songs), Genres (genres), Composers (composers), Settings (settings) · Playlists > Songs · Artists > Albums > Songs · Albums > Songs · Songs · Genres > Artists > Albums > Songs · Composers > Albums > Songs · Settings > Shuffle, Repeat [1] [2] [3] [4] [5] [6] [7] [8] [9] Name of the album [10] Remaining time 60 En USING BLUETOOTHTM COMPONENTS Using BluetoothTM components You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform "pairing" the connected Bluetooth adapter and your Bluetooth component in advance. Pairing the BluetoothTM adapter and your BluetoothTM component Pairing must be performed when using a Bluetooth component with the Bluetooth adapter connected to this unit for the first time or if the pairing data has been deleted. "Pairing" refers to the operation of registering a Bluetooth component for Bluetooth communications. y · You only need the pairing operation for the first time that you use the Bluetooth component with the Bluetooth adapter. · Pairing requires operations on this unit and on the other component with which Bluetooth communications are to be established. If necessary, refer to the other component's operating instructions. Note If the Bluetooth adapter is not connected to the DOCK terminal of this unit, "No BT adapter" appears in the front panel display. 4 Check that the Bluetooth component detects the Bluetooth adapter. If the Bluetooth component detects the Bluetooth adapter, "YBA-10 YAMAHA" (example) appears in the Bluetooth device list. BASIC OPERATION Select the Bluetooth adapter in the Bluetooth device list and then enter the pass key "0000" on the Bluetooth component. Therefore, when recording or dubbing video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an S-video or a composite video signal on your DVD recorder. · A given input source is not output on the same OUT (REC) channel. · The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording. · Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is turned off, this unit may distort the sound from other components. · Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws. y Do a test recording before you start an actual recording. If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. 1 2 Turn on all the connected components. Press R INPUT l / h repeatedly (or press one of the input selector buttons (4)) to select the source component you want to record from. 3 4 Start playback on the selected source component or select a broadcast station. Start recording on the recording component. 62 En SET MENU SET MENU You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Auto setup AUTO SETUP Use this feature to automatically adjust speaker and system parameters (see page 26). MANUAL SETUP Use this feature to manually adjust speaker and system parameters. [. . . ] 72 W W-1:OUT OF PHASE, Auto setup error message . . . . . . . . . . . . . . . . 91 W-2:DISTANCE ERROR, Auto setup error message . . . . . . . . . . . . . . . . 91 W-3:LEVEL ERROR, Auto setup error message . . . . . . . . . . . . . . . . 91 WIRING/LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]