User manual YAMAHA A-1

[. . . ] Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] For more information or to subscribe in Canada, visit XM on the Web at www. xmradio. ca or call XM's Listener Care at 1-877-GETXMSR (1-877-438-9677). [001] Preview y When you select "XM" as the input source, this unit automatically recalls the previously selected channel. 2 Search for a channel by using one of the XM Satellite Radio search modes. · To select a channel from the all channel list, see "All Channel Search mode" on page 39. · To select a channel by category, see "Category Search mode" on page 39. · To select a channel from the preset channels, see "Preset Search mode" on page 39. · To select the desired channel directly by entering the channel number, see "Direct Number Access mode" on page 39. y · You can use the Neural Surround decoder to enjoy the XM HD surround sound content of the XM Satellite Radio broadcasts in multi-channels (see page 32). · You can set the XM Satellite Radio preset channels (see page 40). · You can display the XM Satellite Radio information in the front panel display (see page 41). 38 En XM Satellite Radio tuning y When performing these operations with the remote control, press C XM to select "XM" as the input source. 3 All Channel Search mode Press 5 PRESET/TUNING/CH l / h (or G PRESET/CH k / n) repeatedly to change the preset channel number (1 to 8). 1 Press 2 SEARCH MODE (or P SRCH MODE) repeatedly to select "ALL CH SEARCH". Press 5 PRESET/TUNING/CH l / h (or G PRESET/CH k / n) repeatedly to search for a channel within all channels. y You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) on the remote control. Direct Number Access mode 2 1 2 Press P SRCH MODE repeatedly to select "ALL CH SEARCH" or "CAT SEARCH". Press the numeric buttons (V) to enter the desired three-digit channel number. For example, to enter the number 123, press the numeric buttons as shown below. l h ENHANCER y · You can search for a channel quickly by pressing and holding 5 PRESET/TUNING/CH l / h (or G PRESET/CH k / n). Refer to the operating instructions for those components. Notes · When this unit is set to the standby mode, you cannot record between other components connected to this unit. · The settings of TONE CONTROL (see page 29) and VOLUME settings, speaker levels (see page 29) and the sound field programs (see page 31) do not affect recorded material. · The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded. · The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks. · Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if your source component is connected to provide only digital signals, you cannot record the source. · A given input source is not output on the same OUT (REC) channel. · Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is turned off, this unit may distort the sound from other components. · Check the copyright laws in your country to record from CDs, radio, etc. [. . . ] 8 SCENE 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Selecting audio input jacks . . . . . . . . . . . . . . . . . . 29 Selecting preset stations . . . . . . . . . . . . . . . . . . . . . . . 36 Selecting the MULTI CH INPUT component as the input source . . . . . . . . . [. . . ]