User manual YAMAHA A-S201

[. . . ] 1 2 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances around this unit. [. . . ] Do not use old batteries together with new ones. This may shorten the life of the new batteries or cause old batteries to leak. Do not use different types of batteries (such as alkaline and manganese batteries) together. Batteries that look the same may have a different specification. Before inserting new batteries, wipe the battery compartment clean. Dispose of batteries according to your regional regulations. Keep the batteries in a location out of reach of children. Batteries can be dangerous if a child were to put in his or her mouth. If you plan not to use this unit for a long period of time, remove the batteries from this unit. Otherwise, the batteries will wear out, possibly resulting in a leakage of battery liquid that may damage this unit. • • • • • • • • • English 7 En PREPARATION CONNECTIONS Connecting speakers and source components Make sure to connect L (left) to L , R (right) to R , “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Refer to the owner’s manual for each of your components. Make sure to use RCA cables to connect audio components. CAUTION • Do not connect this unit or other components to the main power until all connections between components are complete. € Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers. Speakers A Right CD player DVD player, etc. left Audio out Audio out GND Audio out Audio out Audio out Audio in Tuner Turntable CD recorder , etc. Right Left Speakers B y • The PHONO jacks are designed for connecting a turntable with an MM cartridge. € Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise without the GND connection. [. . . ] Your tuner and/or CD player cannot be operated with the remote control. The remote control does not support the tuner and/or CD player. Refer to the owner’s manual supplied with the tuner and/or CD palyer. 7 — This unit has become too hot. [. . . ]