User manual YAMAHA ARIUS YDP-131 ERRATA FINE TUNING OF THE PITCH

[. . . ] q Press the catch on the battery holder in the direction indicated by the arrow in the illustration q in order to unlock it. e Remove the old battery from the battery case, and insert the new battery making sure that the (+) and (­) terminals of the battery are positioned as shown in the illustration e. Use only a DC9V, S-006P (6F22) or equivalent battery. [. . . ] q EN OP YAMAHA CORPORATION OF AMERICA Guitar Service Department 6600 Orangethorpe Avenue Buena Park, Calif. TEL: 714 522 9433 YAMAHA EUROPA G. M. B. H. 2084 Rellingen, b. 22/34 Germany TEL: 04101 30 30 PRECAUTIONS Output Jack (with power switch function) Sound Hole Cover (Accessory) YAMAHA-KEMBLE MUSIC (U. K. ) LTD. Sherbourne Drive, Tilbrook, Milton Keynes MK7 8BL, England TEL: 0908-366 700 The output jack is an EIAJ-standard 1/4" phone jack. Be sure to use an appropriate connection cable. The built-in preamplifier is automatically turned on when a plug is inserted into the output jack. When not using the instrument, or when playing it without amplification, be sure to remove the plug from the output jack so that the preamplifier power is turned off. control to "0" when plugging in or unplugging the connection cable. The battery check indicator (BAT. ) will light briefly when a plug is inserted or removed from the output jack. 150 hours 1 hexagonal wrench, Anti Feedback Sound Hole Cover (X1), S-006P (6F22) dry cell battery e EQUALIZER LOW : Adjusts the low frequency level (+/­12dB). HIGH : Adjusts the high frequency level (+/­12dB). : Adjusts the overtone level (+/­12dB). Adjusts the brilliance. By controlling the center frequency, more substance can be given to the tone. For strumming, flat or cut settings are better, for lead or fingering boosting is recommended. control will have no effect when the MID knob is centered. After adjustment of the string height is complete, tune the guitar. * When you lower string height, loosen the truss rod a little (convex or back-bowed). When you raise string height, tighten the adjusting rod a little (concave or up-bowed), fret buzz will stop. Lower string height Raise string height YAMAHA MUSICA ITALIA S. P. A. Viale Italia 88, 20020 Lainate (Milano) Italia TEL: 2 93577 1 y BLEND Blends the tone of the Bar Sensor (Piezo Pickup) and Condenser Mic. [. . . ] With the control centered, a 50:50 mix is achieved. Fully rotating the knob to the Piezo side allows only Piezo tone output. Side results in a mix of 70% Mic and 30% Piezo. [. . . ]