User manual YAMAHA ARIUS YDP-213 ERRATA FINE TUNING OF THE PITCH

[. . . ] : CPX Series) Output Jack (with power switch function) PRECAUTIONS The output jack is an EIAJ-standard 1/4" phone jack. Be sure to use an appropriate connection cable. [. . . ] When not using the instrument, or when playing it without amplification, be sure to remove the plug from the output jack so that the preamplifier power is turned off. Always set the VOLUME control to "0" when plugging in or unplugging the connection cable. The battery check indicator (BAT. ) will light briefly when a plug is inserted or removed from the output jack. This is normal and does not indicate a malfunction. Be sure to remove the battery if the instrument will not be used for an extended period of time in order to prevent possible damage due to battery leakage. ADJUSTING SADDLE HEIGHT (only for adjustable bridge model) String height can be adjusted at the bridge with the two adjuster screws located on either side of the bridge. With the strings loosened, rotate the adjuster screws to adjust string height. DC9V S-006P (6F22) r Slide the battery case back into the battery holder and press firmly so that the battery case locks into place. OP EN e q AMF Control t LOW : Boosts or cuts the level of the low frequencies. MID : Boosts or cuts the level of the middle frequencies. The AMF control adjusts the center frequency of the band affected by this control. HIGH : Boosts or cuts the level of the high frequencies. Sets the center frequency of the band of frequencies affected by the MID equalizer control. Please note that this control has no effect when the MID equalizer control is set to its center ("0") position. r MID SHAPE Switch OFF Overall flat characteristic. Use as a reference when creating your sound. ON w BAT. [. . . ] (Battery Check) Indicator This indicator will light when the battery needs to be replaced. Please replace the battery as soon as possible when the BAT. [. . . ]